RM38N0EC _56 Audio / Visual / Telematics _111825 PARK ASSIST / MONITORING _0501856 TOYOTA PARKING ASSIST-SENSOR SYSTEM T

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.

·

When an open circuit or frozen indication is displayed by the self-check function, check for DTCs and troubleshoot according to each inspection procedure.



General
Symptom Suspected Area Link
System does not operate at all Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Check that the Meter / gauge system is operating normally -
Proceed to "Clearance Warning ECU Power Source Circuit" Click here
Clearance warning ECU assembly Click here
System cannot be turned off Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Check that the Meter / gauge system is operating normally -
Steering pad switch assembly Click here
Spiral cable sub-assembly Click here
Clearance warning ECU assembly Click here

*1: for HV Model

*2: for Gasoline Model


Sonar Function
Symptom Suspected Area Link
Frozen indication is displayed in self-check function Proceed to "Sensor Frozen Indication (Dirty or Frozen)" Click here
"Parking Assist Malfunction Visit Your Dealer" is displayed Calibration Click here
Clearance warning ECU assembly Click here
Combination meter assembly (shift selection) operates normally, but detection operates when shift lever is in P, or detection does not operate when shift lever is in any position other than P (front sonar) Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Clearance warning ECU assembly Click here
Combination meter assembly (shift selection) operates normally, but detection operates when shift lever is not in R, or does not operate with shift lever in R (rear sonar) Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Clearance warning ECU assembly Click here
Combination meter assembly (speedometer) operates normally, but detection does not operate when vehicle speed meets operation condition, or detection operates when vehicle speed does not meet operation condition (front sonar) Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Clearance warning ECU assembly Click here

*1: for HV Model

*2: for Gasoline Model


Buzzer Function
Symptom Suspected Area Link
Sonar detection operation is normal but buzzer operation is intermittent Check that the temporary mute function is not operating -
Proceed to "No. 1 Clearance Warning Buzzer Circuit" Click here
Proceed to "No. 2 Clearance Warning Buzzer Circuit" Click here
Clearance warning ECU assembly Click here

Display Function
Symptom Suspected Area Link
Detection operation is normal but clearance sonar indicator does not illuminate Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Combination meter assembly (LED): Perform Active Test (ICS OFF Warning)*8 Click here
Combination meter assembly (LED): Perform Active Test (Multi Display All (White))*9 Click here
Combination meter assembly Click here
Clearance warning ECU assembly Click here
Detection operation is normal but all displays do not appear Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Clearance warning ECU assembly Click here
Detection operation is normal but sonar displays do not appear on the multi-information display*3,*5 Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Combination meter assembly Click here
Clearance warning ECU assembly Click here
Detection operation is normal but sonar displays do not appear on navigation receiver assembly*3,*4,*6 Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Navigation receiver assembly Click here
Rear television camera assembly*3 Click here
Parking assist ECU*4 Click here
Clearance warning ECU assembly Click here
Detection operation is normal but sonar displays do not appear on radio and display receiver assembly*3,*4,*7 Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Radio and display receiver assembly Click here
Rear television camera assembly*3 Click here
Parking assist ECU*4 Click here
Clearance warning ECU assembly Click here

*1: for HV Model

*2: for Gasoline Model

*3: w/ Parking Assist Monitor System

*4: w/ Panoramic View Monitor System

*5: w/ Back Monitor System

*6: w/ Navigation System

*7: w/ Audio and Visual System

*8: for Optitron Meter Type

*9: for TFT Meter Type


RCTA Function (w/ Blind Spot Monitor System)
Symptom Suspected Area Link
Function does not operate at all
(Blind spot monitor function operates normally)
Data list / active test (Shift Position R) Click here
Check that the hybrid control system is operating normally*1 -
Check that the continuously Variable Transaxle system is operating normally*2 -
Blind spot monitor sensor LH (B) Click here
"Rear Cross Traffic Alert Malfunction Visit Your Dealer" or "Rear Cross Traffic Alert Unavailable" is displayed on the multi-information display Check vehicle control history Click here
Blind spot monitor sensor LH (B) Click here
Blind spot monitor sensor RH (A) Click here
Combination meter assembly Click here
While RCTA function is active, outer rear view mirror indicator flashes but RCTA buzzer does not sound Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Proceed to "No. 2 Clearance Warning Buzzer Circuit" Click here
Blind spot monitor sensor LH (B) Click here
When shift lever is in R, detection operation is normal but RCTA indicator does not appear on the navigation receiver assembly*3,*4,*5 Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Blind spot monitor sensor RH (A) Click here
Blind spot monitor sensor LH (B) Click here
Navigation receiver assembly Click here
Rear television camera assembly*4 Click here
Parking assist ECU*3 Click here
When shift lever is in R, detection operation is normal but RCTA indicator does not appear on the radio and display receiver assembly*3,*4,*6 Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Blind spot monitor sensor RH (A) Click here
Blind spot monitor sensor LH (B) Click here
Radio and display receiver assembly Click here
Rear television camera assembly*4 Click here
Parking assist ECU*3 Click here

*1: for HV Model

*2: for Gasoline Model

*3: w/ Panoramic View Monitor System

*4: w/ Parking Assist Monitor System

*5: w/ Navigation System

*6: w/ Audio and Visual System


Voice Guidance Function (w/ Voice Guidance Function)
Symptom Suspected Area Link
Voice guidance is not performed even though a search operation is performed (navigation audio is normal) Using the GTS, check that the customized setting voice guidance function is enabled. Click here
Clearance warning ECU assembly Click here
Navigation receiver assembly Click here