RM38N0EC _56 Audio / Visual / Telematics _111825 PARK ASSIST / MONITORING _0501857 PARKING SUPPORT BRAKE SYSTEM T

PARK ASSIST / MONITORING  PARKING SUPPORT BRAKE SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



General
Symptom Suspected Area Link
System does not operate at all Check that the toyota parking assist-sensor system is operating normally -
Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Check that the blind spot monitor system is operating normally*3 -
Steering pad switch assembly Click here
Spiral cable sub-assembly Click here
Clearance warning ECU assembly Click here

Sonar Function
Symptom Suspected Area Link
Detection function operates when the operating conditions are not met Check that the SFI System is operating normally*2 -
Check that the hybrid control system is operating normally*1 -
No. 2 skid control ECU (brake actuator assembly)*1 Click here
Skid control ECU (brake actuator assembly)*2 Click here
Check that the blind spot monitor system is operating normally*3 -
Clearance warning ECU assembly Click here
Detection function operates when vehicle is not within the required speed range (speedometer not malfunctioning) Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Clearance warning ECU assembly Click here

Buzzer Function
Symptom Suspected Area Link
Parking support brake system is normal but buzzer operation is intermittent Check that the temporary mute function is not operating -
Check that the blind spot monitor system is operating normally*3 -
Proceed to "No. 1 Clearance Warning Buzzer Circuit" Click here
Proceed to "No. 2 Clearance Warning Buzzer Circuit" Click here
Clearance warning ECU assembly Click here
Combination meter assembly Click here

Display Function
Symptom Suspected Area Link
While the parking support brake system is operating, no parking support brake notifications are displayed on the multi-information display. Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Clearance warning ECU assembly Click here
Combination meter assembly Click here
While the parking support brake system is operating, no parking support brake notifications are displayed on the headup display.*4 Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Clearance warning ECU assembly Click here
Meter mirror sub-assembly Click here
"PKSB Malfunction Visit Your Dealer" is displayed Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Combination meter assembly Click here
Clearance warning ECU assembly Click here
"PKSB Unavailable" is displayed Check that no foreign matter is attached to the ultrasonic sensors. -
Check that the CAN communication system is operating normally*1 Click here
Check that the CAN communication system is operating normally*2 Click here
Check that the toyota parking assist-sensor system is operating normally -
Check that the blind spot monitor system is operating normally*3 -
Combination meter assembly Click here
Clearance warning ECU assembly Click here
Parking support brake system does not operate when there is a possibility of a collision (Warning message "PKSB Unavailable" not displayed) Check the installation of the ultrasonic sensors (front) Click here
Check the installation of the ultrasonic sensors (rear) Click here
Adjust the installation of the ultrasonic sensors as necessary. Click here
Ultrasonic sensors (front) Click here
Ultrasonic sensors (rear) Click here
Clearance warning ECU assembly Click here
Parking support brake system control operates when there is no possibility of a collision Check the installation of the ultrasonic sensors (front) Click here
Check the installation of the ultrasonic sensors (rear) Click here
Adjust the installation of the ultrasonic sensors as necessary. Click here
Ultrasonic sensors (front) Click here
Ultrasonic sensors (rear) Click here
Clearance warning ECU assembly Click here
Parking support brake system control cannot be turned off (PKSB OFF indicator does not illuminate) Combination meter assembly (LED): Perform Active Test (Indicat. PKSB OFF LCD) for Optitron Meter Type:Click here
for TFT Meter Type:Click here
Steering pad switch assembly Click here
Spiral cable sub-assembly Click here
Clearance warning ECU assembly Click here
PKSB OFF indicator illuminates Check that no foreign matter is attached to the ultrasonic sensors. -

*1: for HV Model

*2: for Gasoline Model

*3: w/ Blind Spot Monitor System

*4: w/ Headup Display System