A bolt without a torque specification is shown in the standard bolt chart.
897B0A
1.INSTALL ELECTRICAL KEY AND TPMS RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)
89740A
2.INSTALL SMART DOOR CONTROL RECEIVER ASSEMBLY
|
Bolt |
|
Connector |
Attach the guide to install the smart door control receiver assembly with the bolt.
Do not subject the smart door control receiver assembly to strong impacts or force, and do not drop it.
Do not reuse the smart door control receiver assembly that has been dropped.
Connect the connector.
62640M
3.INSTALL REAR QUARTER TRIM BOARD ASSEMBLY LH
67872A
4.INSTALL NO. 1 SLIDE DOOR WEATHERSTRIP LH
Use the same procedure described for the RH side.
67918D
5.INSTALL REAR DOOR SCUFF PLATE LH
73370E
6.INSTALL REAR SEAT OUTER BELT ASSEMBLY LH (w/ Seat Belt)
73178C
7.INSTALL SEAT BELT ANCHOR COVER CAP (w/ Seat Belt)
67935
8.INSTALL BACK DOOR SCUFF PLATE
9.INSTALL REAR SEAT ASSEMBLY LH
for Manual Captain Seat:
for Power Captain Seat:
for 60/40 Split Seat Type 40 Side:
for 60/40 Split Seat Type 60 Side:
10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Pretensioner and Force Limiter)
11. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (w/ Pretensioner and Force Limiter)
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
12.INSPECT SEAT BELT WARNING SYSTEM (w/ Seat Belt Warning System)
13. REGISTRATION OF TRANSMITTER ID
14.INSPECT TIRE PRESSURE WARNING SYSTEM
15.PERFORM INITIALIZATION