RM35X0E _58 Vehicle Interior _078378 THEFT DETERRENT / KEYLESS ENTRY _0396478 ELECTRICAL KEY OSCILLATOR(for Front Floor) A

THEFT DETERRENT / KEYLESS ENTRY  ELECTRICAL KEY OSCILLATOR(for Front Floor)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below is for LHD vehicles.

·

The procedure listed below is a representative example.



PROCEDURE

Hide 899A0 1.INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

NOTICE:

Do not reuse parts if dropped or subjected to any strong impact.


a.

for Front Side:

i.
E417881

Connect the connector.


ii.

Attach the claw to install the No. 1 indoor electrical key antenna assembly.



b.

for Rear Side:

i.
E417880

Connect the connector.


ii.

Attach the claw to install the No. 1 indoor electrical key antenna assembly.



Hide 58515B 2.INSTALL NO. 5 FLOOR MAT

a.

Install the No. 5 floor mat.


Hide 58595 7.INSTALL NO. 3 FLOOR NO. 3 CARPET MOULDING (w/ Power Supply Unit)

Hide 58595 8.INSTALL NO. 3 FLOOR NO. 4 CARPET MOULDING (w/ Power Supply Unit)

Hide 16. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (for First Row)