RM3660EC _58 Vehicle Interior _080793 METER / GAUGE / DISPLAY _0473175 METER / GAUGE SYSTEM(for 12.3 Inch Display) C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM(for 12.3 Inch Display)  B150718  Turn Signal Light Circuit Current Below Threshold  


DESCRIPTION

This DTC is stored when the combination meter assembly detects an open in a front turn signal light circuit or rear turn signal light circuit.

HINT:
·

If there is an open in a front turn signal light circuit or rear turn signal light circuit, the turn signal lights on the side with the open circuit will blink faster than usual.

·

If there is an open in a side turn signal light circuit, DTC B150718 will not be stored.



DTC No. Detection Item DTC Detection Condition Trouble Area
B150718 Turn Signal Light Circuit Current Below Threshold Diagnosis Condition:

Battery voltage is 10 V or more


Malfunction Status:
·

Open in front turn signal light circuit

·

Open in rear turn signal light circuit


for TFTM Made
·

Headlight assembly

·

Rear combination light assembly

-

Rear combination light socket and wire*1

-

Rear turn signal light bulb*1


·

Harness or connector

·

Combination meter assembly


for GTMC Made
·

Headlight assembly

·

Rear combination light assembly

-

Rear combination light socket and wire*2

-

Rear turn signal light bulb


·

Harness or connector

·

Combination meter assembly



*1: for Bulb Type Turn Signal Light

*2: for LEVIN


WIRING DIAGRAM

FOR TFTM MADE


E516195
1,1.823 4.208,2.021 3.208,0.198 10 false Headlight Assembly LH 0.979,3.417 4.188,3.615 3.208,0.198 10 false Headlight Assembly LH 1,1.646 1.615,1.844 0.615,0.198 10 false A166 5.208,7.354 5.823,7.552 0.615,0.198 10 false I5 3.521,2.417 3.833,2.615 0.313,0.198 10 false *2 2.854,0.844 3.125,1.156 0.271,0.313 10 false B 2.854,1.125 3.125,1.438 0.271,0.313 10 false E 2.854,2.458 3.125,2.771 0.271,0.313 10 false B 2.854,2.74 3.125,3.052 0.271,0.313 10 false E 3.073,0.854 3.344,1.167 0.271,0.313 10 false 7 3.073,1.125 3.344,1.438 0.271,0.313 10 false 4 3.073,2.448 3.344,2.76 0.271,0.313 10 false 1 0.979,3.24 1.594,3.438 0.615,0.198 10 false A164 5.208,0.833 5.479,1.146 0.271,0.313 10 false 5 5.135,4.323 5.406,4.635 0.271,0.313 10 false 22 5.417,0.833 6.031,1.031 0.615,0.198 10 false LL 5.417,4.313 6.031,4.51 0.615,0.198 10 false TRNL 6.01,3.438 6.688,4.021 0.677,0.583 10 false FLASHER IC 5.198,7.563 7.031,8.188 1.833,0.625 10 false Combination Meter Assembly 3.49,0.802 3.802,1 0.313,0.198 10 false *1 3.5,5.927 3.813,6.125 0.313,0.198 10 false *2 3.49,4.313 3.802,4.51 0.313,0.198 10 false *1 0.563,5.313 5.76,5.51 5.198,0.198 10 false Rear Combination Light Assembly LH 0.552,5.135 1.167,5.333 0.615,0.198 10 false O104 0.615,7.156 1.229,7.354 0.615,0.198 10 false O104 0.615,7.344 5.813,7.542 5.198,0.198 10 false Rear Combination Light Assembly LH 2.844,4.333 3.115,4.646 0.271,0.313 10 false B 2.844,4.615 3.115,4.927 0.271,0.313 10 false E 2.865,6.323 3.135,6.635 0.271,0.313 10 false E 2.865,6.021 3.135,6.333 0.271,0.313 10 false B 3.083,2.74 3.354,3.052 0.271,0.313 10 false 2 3.063,5.948 3.333,6.26 0.271,0.313 10 false 3 3.083,4.615 3.354,4.875 0.271,0.26 10 false 4 3.083,4.333 3.354,4.646 0.271,0.313 10 false 3 3.063,6.208 3.333,6.469 0.271,0.26 10 false 4 1.313,6.563 2.75,7.292 1.438,0.729 10 false Rear Combination Light Socket and Wire LH 0.354,8.417 5.708,8.615 5.354,0.198 10 false *2: for Bulb Type Turn Signal Light 0.365,8.063 5.719,8.26 5.354,0.198 10 false *1: for LED Type Turn Signal Light

E516195
1,1.823 4.208,2.021 3.208,0.198 10 false Headlight Assembly RH 0.979,3.417 4.188,3.615 3.208,0.198 10 false Headlight Assembly RH 1,1.646 1.615,1.844 0.615,0.198 10 false A165 5.208,7.344 5.823,7.542 0.615,0.198 10 false I5 3.521,2.417 3.833,2.615 0.313,0.198 10 false *2 2.854,0.844 3.125,1.156 0.271,0.313 10 false B 2.854,1.125 3.125,1.438 0.271,0.313 10 false E 2.854,2.458 3.125,2.771 0.271,0.313 10 false B 2.854,2.74 3.125,3.052 0.271,0.313 10 false E 3.073,0.854 3.344,1.167 0.271,0.313 10 false 7 3.073,1.125 3.344,1.438 0.271,0.313 10 false 4 3.073,2.448 3.344,2.76 0.271,0.313 10 false 1 0.979,3.25 1.594,3.448 0.615,0.198 10 false A163 5.198,0.833 5.469,1.146 0.271,0.313 10 false 6 5.146,4.313 5.417,4.625 0.271,0.313 10 false 21 5.417,0.833 6.031,1.031 0.615,0.198 10 false LR 5.417,4.302 6.031,4.5 0.615,0.198 10 false TRNR 6.01,3.438 6.688,4.021 0.677,0.583 10 false FLASHER IC 5.198,7.542 7.031,8.167 1.833,0.625 10 false Combination Meter Assembly 3.49,0.802 3.802,1 0.313,0.198 10 false *1 3.5,5.927 3.813,6.125 0.313,0.198 10 false *2 3.49,4.313 3.802,4.51 0.313,0.198 10 false *1 0.563,5.313 5.76,5.51 5.198,0.198 10 false Rear Combination Light Assembly RH 0.552,5.135 1.167,5.333 0.615,0.198 10 false O103 0.604,7.177 1.219,7.375 0.615,0.198 10 false O103 0.615,7.375 5.813,7.573 5.198,0.198 10 false Rear Combination Light Assembly RH 2.844,4.333 3.115,4.646 0.271,0.313 10 false B 2.844,4.615 3.115,4.927 0.271,0.313 10 false E 2.865,6.323 3.135,6.635 0.271,0.313 10 false E 2.865,6.021 3.135,6.333 0.271,0.313 10 false B 3.083,2.74 3.354,3.052 0.271,0.313 10 false 2 3.063,5.948 3.333,6.26 0.271,0.313 10 false 3 3.083,4.615 3.354,4.875 0.271,0.26 10 false 4 3.083,4.333 3.354,4.646 0.271,0.313 10 false 3 3.063,6.208 3.333,6.469 0.271,0.26 10 false 4 1.313,6.563 2.75,7.292 1.438,0.729 10 false Rear Combination Light Socket and Wire RH 0.354,8.417 5.708,8.615 5.354,0.198 10 false *2: for Bulb Type Turn Signal Light 0.365,8.063 5.719,8.26 5.354,0.198 10 false *1: for LED Type Turn Signal Light


FOR GTMC MADE


E516196E01
0.833,1.906 4.042,2.104 3.208,0.198 10 false Headlight Assembly LH 0.833,1.719 1.448,1.917 0.615,0.198 10 false A168 2.719,0.896 2.938,1.198 0.219,0.302 10 false B 2.938,1.188 3.156,1.49 0.219,0.302 10 false 5 2.927,0.896 3.146,1.198 0.219,0.302 10 false 1 2.719,1.188 2.938,1.49 0.219,0.302 10 false E 0.427,3.875 5.625,4.073 5.198,0.198 10 false Rear Combination Light Assembly LH 0.417,3.688 1.031,3.885 0.615,0.198 10 false O104 0.448,5.698 1.063,5.896 0.615,0.198 10 false O104 0.448,5.885 5.646,6.083 5.198,0.198 10 false Rear Combination Light Assembly LH 1.188,5.115 2.646,5.635 1.458,0.521 10 false Rear Combination Light Socket and Wire LH 3.365,2.854 3.677,3.271 0.313,0.417 10 false *1 3.365,4.469 3.677,4.885 0.313,0.417 10 false *2 2.708,2.865 2.927,3.167 0.219,0.302 10 false B 2.719,4.573 2.938,4.875 0.219,0.302 10 false B 2.708,3.156 2.927,3.458 0.219,0.302 10 false E 2.719,4.854 2.938,5.156 0.219,0.302 10 false E 2.927,2.865 3.146,3.156 0.219,0.292 10 false 3 2.917,3.146 3.135,3.448 0.219,0.302 10 false 4 2.906,4.479 3.125,4.781 0.219,0.302 10 false 3 2.906,4.75 3.125,5.052 0.219,0.302 10 false 4 5.875,3.052 6.521,3.521 0.646,0.469 10 false FLASHER IC 5.271,0.896 5.854,1.208 0.583,0.313 10 false LL 5.271,2.865 5.854,3.177 0.583,0.313 10 false TRNL 5.073,0.896 5.792,1.385 0.719,0.49 10 false 5 5,2.854 5.719,3.344 0.719,0.49 10 false 22 5.073,6.771 6.958,7.375 1.885,0.604 10 false Combination Meter Assembly 5.073,6.583 6.958,7.188 1.885,0.604 10 false I5 0.375,6.802 5.573,7 5.198,0.198 10 false *1: for LEVIN GT 0.375,7.208 5.573,7.406 5.198,0.198 10 false *2: for LEVIN

E516196E02
0.833,1.906 4.042,2.104 3.208,0.198 10 false Headlight Assembly RH 0.833,1.719 1.448,1.917 0.615,0.198 10 false A167 2.719,0.896 2.938,1.198 0.219,0.302 10 false B 2.938,1.188 3.156,1.49 0.219,0.302 10 false 5 2.927,0.896 3.146,1.198 0.219,0.302 10 false 1 2.719,1.188 2.938,1.49 0.219,0.302 10 false E 0.427,3.875 5.625,4.073 5.198,0.198 10 false Rear Combination Light Assembly RH 0.417,3.688 1.031,3.885 0.615,0.198 10 false O103 0.448,5.698 1.063,5.896 0.615,0.198 10 false O103 0.448,5.885 5.646,6.083 5.198,0.198 10 false Rear Combination Light Assembly RH 1.188,5.115 2.646,5.635 1.458,0.521 10 false Rear Combination Light Socket and Wire RH 3.365,2.854 3.677,3.271 0.313,0.417 10 false *1 3.365,4.469 3.677,4.885 0.313,0.417 10 false *2 2.708,2.865 2.927,3.167 0.219,0.302 10 false B 2.719,4.573 2.938,4.875 0.219,0.302 10 false B 2.708,3.156 2.927,3.458 0.219,0.302 10 false E 2.719,4.854 2.938,5.156 0.219,0.302 10 false E 2.927,2.865 3.146,3.156 0.219,0.292 10 false 3 2.917,3.146 3.135,3.448 0.219,0.302 10 false 4 2.906,4.479 3.125,4.781 0.219,0.302 10 false 3 2.906,4.75 3.125,5.052 0.219,0.302 10 false 4 5.875,3.052 6.521,3.521 0.646,0.469 10 false FLASHER IC 5.271,0.896 5.854,1.208 0.583,0.313 10 false LR 5.271,2.854 5.854,3.167 0.583,0.313 10 false TRNR 5.073,0.896 5.792,1.385 0.719,0.49 10 false 6 5,2.865 5.719,3.354 0.719,0.49 10 false 21 5.073,6.771 6.958,7.375 1.885,0.604 10 false Combination Meter Assembly 5.073,6.583 6.958,7.188 1.885,0.604 10 false I5 0.375,6.802 5.573,7 5.198,0.198 10 false *1: for LEVIN GT 0.375,7.208 5.573,7.406 5.198,0.198 10 false *2: for LEVIN


CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

·

except NR Series Engine

When replacing the combination meter assembly, update the ECU security key.

Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>UPDATE ECU SECURITY KEY

·

Inspect the turn signal light bulbs before performing the following procedure.



PROCEDURE

1.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for TFTM Made A
for GTMC Made B



A

2.CHECK SYMPTOMS

B

17.CHECK SYMPTOMS
2.CHECK SYMPTOMS
a.

Operate the turn signal switch and check the problem symptoms.


Result:
Result Proceed to
Front turn signal light (LH side) does not blink A
Rear turn signal light (LH side) does not blink B
Front turn signal light (RH side) does not blink C
Rear turn signal light (RH side) does not blink D



A

3.CHECK FRONT TURN SIGNAL LIGHT (HEADLIGHT ASSEMBLY LH)

B

5.CONFIRM MODEL

C

10.CHECK FRONT TURN SIGNAL LIGHT (HEADLIGHT ASSEMBLY RH)

D

12.CONFIRM MODEL
3.CHECK FRONT TURN SIGNAL LIGHT (HEADLIGHT ASSEMBLY LH)
a.

Remove the headlight assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for TFTM Made)>REMOVAL


b.

Remove the headlight assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for TFTM Made)>REMOVAL


c.

Interchange the headlight assembly LH with RH and connect the connectors.


d.

Check the front turn signal light (LH side) operates normally.


Result:
Result Proceed to
Problem symptoms do not change
(Front turn signal light (LH side) does not blink) 		A
Front turn signal light (LH side) operates normally B



A

4.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY AND BODY GROUND)

B

REPLACE HEADLIGHT ASSEMBLY LH

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for TFTM Made)>REMOVAL


4.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY AND BODY GROUND)
a.

Disconnect the A166*1 or A164*2 headlight assembly LH connector.

*1: for LED Type Turn Signal Light

*2: for Bulb Type Turn Signal Light



b.

Disconnect the I5 combination meter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance (for LED Type Turn Signal Light):
Tester Connection Condition Specified Condition
A166-1 (B) - I5-6 (LL) Always Below 1 Ω
A166-2 (E) - Body ground Always Below 1 Ω


Standard Resistance (for Bulb Type Turn Signal Light):
Tester Connection Condition Specified Condition
A164-7 (B) - I5-6 (LL) Always Below 1 Ω
A164-4 (E) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LED Type Turn Signal Light A
for Bulb Type Turn Signal Light B



A

6.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

B

7.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH
6.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>INSPECTION

Result:
Proceed to
OK
NG



OK

8.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY AND BODY GROUND)

NG

REPLACE REAR COMBINATION LIGHT ASSEMBLY LH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>REMOVAL


7.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>INSPECTION

Result:
Proceed to
OK
NG



OK

8.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY AND BODY GROUND)

NG

9.CHECK REAR TURN SIGNAL LIGHT (REAR COMBINATION LIGHT SOCKET AND WIRE LH)
8.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY AND BODY GROUND)
a.

Disconnect the I5 combination meter assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O104-3 (B) - I5-22 (TRNL) Always Below 1 Ω
O104-4 (E) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

9.CHECK REAR TURN SIGNAL LIGHT (REAR COMBINATION LIGHT SOCKET AND WIRE LH)
a.

Remove the rear combination light socket and wire LH from the rear combination light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>DISASSEMBLY


b.

Remove the rear combination light socket and wire RH from the rear combination light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>DISASSEMBLY


c.

Interchange the rear combination light socket and wire LH with RH and connect the connectors.


d.

Check the rear turn signal light (LH side) operates normally.


Result:
Result Proceed to
Problem symptoms do not change
(Rear turn signal light does not blink) 		A
Rear turn signal light (LH side) operates normally B



A

REPLACE REAR COMBINATION LIGHT ASSEMBLY LH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>REMOVAL


B

REPLACE REAR COMBINATION LIGHT SOCKET AND WIRE LH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>DISASSEMBLY


10.CHECK FRONT TURN SIGNAL LIGHT (HEADLIGHT ASSEMBLY RH)
a.

Remove the headlight assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for TFTM Made)>REMOVAL


b.

Remove the headlight assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for TFTM Made)>REMOVAL


c.

Interchange the headlight assembly RH with LH and connect the connectors.


d.

Check the front turn signal light (RH side) operates normally.


Result:
Result Proceed to
Problem symptoms do not change
(Front turn signal light (RH side) does not blink) 		A
Front turn signal light (RH side) operates normally B



A

11.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY AND BODY GROUND)

B

REPLACE HEADLIGHT ASSEMBLY RH

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for TFTM Made)>REMOVAL


11.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY AND BODY GROUND)
a.

Disconnect the A165*1 or A163*2 headlight assembly RH connector.

*1: for LED Type Turn Signal Light

*2: for Bulb Type Turn Signal Light



b.

Disconnect the I5 combination meter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance (for LED Type Turn Signal Light):
Tester Connection Condition Specified Condition
A165-7 (B) - I5-5 (LR) Always Below 1 Ω
A165-4 (E) - Body ground Always Below 1 Ω


Standard Resistance (for Bulb Type Turn Signal Light):
Tester Connection Condition Specified Condition
A163-1 (B) - I5-5 (LR) Always Below 1 Ω
A163-2 (E) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

12.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LED Type Turn Signal Light A
for Bulb Type Turn Signal Light B



A

13.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

B

14.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH
13.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>INSPECTION

Result:
Proceed to
OK
NG



OK

15.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY AND BODY GROUND)

NG

REPLACE REAR COMBINATION LIGHT ASSEMBLY RH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>REMOVAL


14.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>INSPECTION

Result:
Proceed to
OK
NG



OK

15.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY AND BODY GROUND)

NG

16.CHECK REAR TURN SIGNAL LIGHT (REAR COMBINATION LIGHT SOCKET AND WIRE RH)
15.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY AND BODY GROUND)
a.

Disconnect the I5 combination meter assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O103-3 (B) - I5-21 (TRNR) Always Below 1 Ω
O103-4 (E) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

16.CHECK REAR TURN SIGNAL LIGHT (REAR COMBINATION LIGHT SOCKET AND WIRE RH)
a.

Remove the rear combination light socket and wire RH from the rear combination light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>DISASSEMBLY


b.

Remove the rear combination light socket and wire LH from the rear combination light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>DISASSEMBLY


c.

Interchange the rear combination light socket and wire RH with LH and connect the connectors.


d.

Check the rear turn signal light (RH side) operates normally.


Result:
Result Proceed to
Problem symptoms do not change
(Rear turn signal light does not blink) 		A
Rear turn signal light (RH side) operates normally B



A

REPLACE REAR COMBINATION LIGHT ASSEMBLY RH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>REMOVAL


B

REPLACE REAR COMBINATION LIGHT SOCKET AND WIRE RH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for TFTM Made)>DISASSEMBLY


17.CHECK SYMPTOMS
a.

Operate the turn signal switch and check the problem symptoms.


Result:
Result Proceed to
Front turn signal light (LH side) does not blink A
Rear turn signal light (LH side) does not blink B
Front turn signal light (RH side) does not blink C
Rear turn signal light (RH side) does not blink D



A

18.CHECK FRONT TURN SIGNAL LIGHT (HEADLIGHT ASSEMBLY LH)

B

20.CONFIRM MODEL

C

25.CHECK FRONT TURN SIGNAL LIGHT (HEADLIGHT ASSEMBLY RH)

D

27.CONFIRM MODEL
18.CHECK FRONT TURN SIGNAL LIGHT (HEADLIGHT ASSEMBLY LH)
a.

Remove the headlight assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for GTMC Made)>REMOVAL


b.

Remove the headlight assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for GTMC Made)>REMOVAL


c.

Interchange the headlight assembly LH with RH and connect the connectors.


d.

Check the front turn signal light (LH side) operates normally.


Result:
Result Proceed to
Problem symptoms do not change
(Front turn signal light (LH side) does not blink) 		A
Front turn signal light (LH side) operates normally B



A

19.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY AND BODY GROUND)

B

REPLACE HEADLIGHT ASSEMBLY LH

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for GTMC Made)>REMOVAL


19.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY AND BODY GROUND)
a.

Disconnect the A168 headlight assembly LH connector.


b.

Disconnect the I5 combination meter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A168-1 (B) - I5-5 (LL) Always Below 1 Ω
A168-5 (E) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

20.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LEVIN GT A
for LEVIN B



A

21.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

B

22.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH
21.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>INSPECTION

Result:
Proceed to
OK
NG



OK

23.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY AND BODY GROUND)

NG

REPLACE REAR COMBINATION LIGHT ASSEMBLY LH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>REMOVAL


22.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>INSPECTION

Result:
Proceed to
OK
NG



OK

23.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY AND BODY GROUND)

NG

24.CHECK REAR TURN SIGNAL LIGHT (REAR COMBINATION LIGHT SOCKET AND WIRE LH)
23.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY AND BODY GROUND)
a.

Disconnect the O104 rear combination light assembly LH connector.


b.

Disconnect the I5 combination meter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O104-3 (B) - I5-22 (TRNL) Always Below 1 Ω
O104-4 (E) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

24.CHECK REAR TURN SIGNAL LIGHT (REAR COMBINATION LIGHT SOCKET AND WIRE LH)
a.

Remove the rear combination light socket and wire LH from the rear combination light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>DISASSEMBLY


b.

Remove the rear combination light socket and wire RH from the rear combination light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>DISASSEMBLY


c.

Interchange the rear combination light socket and wire LH with RH and connect the connectors.


d.

Check the rear turn signal light (LH side) operates normally.


Result:
Result Proceed to
Problem symptoms do not change
(Rear turn signal light (LH side) does not blink) 		A
Rear turn signal light (LH side) operates normally B



A

REPLACE REAR COMBINATION LIGHT ASSEMBLY LH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>REMOVAL


B

REPLACE REAR COMBINATION LIGHT SOCKET AND WIRE LH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>DISASSEMBLY


25.CHECK FRONT TURN SIGNAL LIGHT (HEADLIGHT ASSEMBLY RH)
a.

Remove the headlight assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for GTMC Made)>REMOVAL


b.

Remove the headlight assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for GTMC Made)>REMOVAL


c.

Interchange the headlight assembly RH with LH and connect the connectors.


d.

Check the front turn signal light (RH side) operates normally.


Result:
Result Proceed to
Problem symptoms do not change
(Front turn signal light (RH side) does not blink) 		A
Front turn signal light (RH side) operates normally B



A

26.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY AND BODY GROUND)

B

REPLACE HEADLIGHT ASSEMBLY RH

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for GTMC Made)>REMOVAL


26.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY AND BODY GROUND)
a.

Disconnect the A167 headlight assembly RH connector.


b.

Disconnect the I5 combination meter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A167-1 (B) - I5-6 (LR) Always Below 1 Ω
A167-5 (E) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

27.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LEVIN GT A
for LEVIN B



A

28.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

B

29.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH
28.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>INSPECTION

Result:
Proceed to
OK
NG



OK

30.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY AND BODY GROUND)

NG

REPLACE REAR COMBINATION LIGHT ASSEMBLY RH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>REMOVAL


29.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>INSPECTION

Result:
Proceed to
OK
NG



OK

30.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY AND BODY GROUND)

NG

31.CHECK REAR TURN SIGNAL LIGHT (REAR COMBINATION LIGHT SOCKET AND WIRE RH)
30.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY AND BODY GROUND)
a.

Disconnect the O103 rear combination light assembly RH connector.


b.

Disconnect the I5 combination meter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O103-3 (B) - I5-21 (TRNR) Always Below 1 Ω
O103-4 (E) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

31.CHECK REAR TURN SIGNAL LIGHT (REAR COMBINATION LIGHT SOCKET AND WIRE RH)
a.

Remove the rear combination light socket and wire RH from the rear combination light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>DISASSEMBLY


b.

Remove the rear combination light socket and wire LH from the rear combination light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>DISASSEMBLY


c.

Interchange the rear combination light socket and wire RH with LH and connect the connectors.


d.

Check the rear turn signal light (RH side) operates normally.


Result:
Result Proceed to
Problem symptoms do not change
(Rear turn signal light (RH side) does not blink) 		A
Rear turn signal light (RH side) operates normally B



A

REPLACE REAR COMBINATION LIGHT ASSEMBLY RH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>REMOVAL


B

REPLACE REAR COMBINATION LIGHT SOCKET AND WIRE RH

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for GTMC Made)>DISASSEMBLY