Use the same procedure for the RHD and LHD vehicles.
The procedure listed below is for the RHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the RH side.
82351B
1.INSTALL COURTESY LIGHT WIRE
Connect the 2 connectors to install the courtesy light wire.
62610K
2.INSTALL SIDE TRIM BOARD ASSEMBLY RH (for Full-trim, High Roof)
62631D
3.INSTALL REAR QUARTER TRIM BOARD RH (for Semi-trim)
Use the same procedure described for the LH side.
62630L
4.INSTALL REAR QUARTER TRIM BOARD ASSEMBLY RH (for Full-trim)
74680
5.INSTALL PILLAR ASSIST GRIP ASSEMBLY C (for Full-trim, w/ Assist Grip)
74617A
6.INSTALL ASSIST GRIP PLUG (for Full-trim, w/ Assist Grip)
7.INSTALL REAR DOOR SCUFF PLATE RH (for Full-trim)
74708
8.INSTALL NO. 2 HAND GRIP FRAME SUB-ASSEMBLY (w/ Hand Rail)
74733
9.INSTALL NO. 1 HAND GRIP COVER (w/ Hand Rail)
67935
10.INSTALL BACK DOOR SCUFF PLATE (for Full-trim)
11.INSTALL REAR SEAT OUTER BELT ASSEMBLY RH (for Van)
Use the same procedure described for the LH side.
12.INSTALL REAR SEAT OUTER BELT ASSEMBLY RH (FLOOR ANCHOR) (for Full-trim)
Use the same procedure described for the LH side.
13.INSTALL REAR SEAT ASSEMBLY
for Commuter, 3-Passenger Seat with 2-Point Type Seat Belt and Headrest:
for Commuter, 3-Passenger Seat with 2-Point Type Seat Belt without Headrest:
for Commuter, 3-Passenger Seat with 3-Point Type Seat Belt:
for Commuter, 4-Passenger Seat:
for Commuter, Single-Passenger Seat with 2-Point Type Seat Belt:
for Commuter, Single-Passenger Seat with 3-Point Type Seat Belt:
for Commuter, 2-Passenger Seat with 2-Point Type Seat Belt:
for Commuter, 2-Passenger Seat with 2-Point Type Seat Belt and Headrest:
for Commuter, 2-Passenger Seat with 2-Point Type Seat Belt without Headrest:
84234
14.INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY
for Semi-trim:
Connect the connector.
Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the "TORX" screw.
for Full-trim:
Connect the connector.
Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the "TORX" screw.