HEATING / AIR CONDITIONING  REAR EVAPORATOR TEMPERATURE SENSOR(for Rear Cooler)  INSTALLATION  

0.417,1.49 0.573,1.688 0.156,0.198 10 false A 0.74,1.792 0.896,1.99 0.156,0.198 10 false B 1.156,2.313 1.313,2.51 0.156,0.198 10 false C 1.188,2.677 1.344,2.875 0.156,0.198 10 false D 1.281,3.073 1.521,3.26 0.24,0.188 10 false E

Install the No. 2 cooler thermistor (rear evaporator temperature sensor) as shown in the illustration.

Installation Position:

Position	Measurement
A	130.8 to 140.8 mm (5.15 to 5.54 in.)
B	45 to 55 mm (1.77 to 2.17 in.)
C	56.1 mm (2.21 in.) (9 Fins)
D	69.5 mm (2.74 in.) (11 Fins)
E	96.3 mm (3.79 in.) (15 Fins)

NOTICE:

·

Be sure to insert the No. 2 cooler thermistor (rear evaporator temperature sensor) only once because reinserting it into the same position will not allow it to be firmly secured.

·

When reusing the evaporator, insert the No. 2 cooler thermistor (rear evaporator temperature sensor) one row next to the one that has been used previously.

·

After inserting the thermistor, do not apply excessive force to the wire.