☰ Toyota Frontlander☰ فهرستVehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SMART ENTRY AND START SYSTEM(for Start Function, HEV Model)
RM38T0EC
_58
Vehicle Interior
_115230
THEFT DETERRENT / KEYLESS ENTRY
_0606512
SMART ENTRY AND START SYSTEM(for Start Function, HEV Model)
T
THEFT DETERRENT / KEYLESS ENTRY SMART ENTRY AND START SYSTEM(for Start Function, HEV Model) PROBLEM SYMPTOMS TABLE
- HINT:
- ·
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
·Inspect the fuses and relays related to the system before inspecting the suspected areas below.
·If the problem occurs in certain locations or times of day, the possibility of wave interference is high.
·If a malfunction occurred after optional components were installed by the dealer, check if there is wave interference from the components.
| Symptom | Suspected Area | Link |
|---|---|---|
| Power source mode does not change to ON or on ACC | Smart entry and start system (for Entry Function)*2 |  202307,999999,_58,_115230,_0606512,RM100000002C25V,
|
| Affected by wave interference | ||
| Transmitter battery | ||
| Electrical key transmitter sub-assembly | ||
| No. 1 indoor electrical key antenna assembly (front floor) | ||
| No. 3 indoor electrical key antenna assembly (inside luggage compartment) | ||
| Power switch | ||
| Wire harness or connector | ||
| Power distribution box assembly | ||
| Certification ECU (Smart key ECU assembly) | ||
| Power source mode does not change to ON | Wire harness or connector | 202307,999999,_58,_115230,_0606512,RM100000002C25W,
|
| No. 1 Integration Relay | ||
| Power distribution box assembly | ||
| Certification ECU (Smart key ECU assembly) | ||
| Power source mode does not change to on ACC | Wire harness or connector | 202307,999999,_58,_115230,_0606512,RM100000002C25X,
|
| Relay | ||
| Power distribution box assembly | ||
| Certification ECU (Smart key ECU assembly) | ||
| Only +BA power source mode does not operate correctly | Entry and start system (for Entry Function)*2 | 202307,999999,_58,_115230,_0606511,RM100000002C244,
|
| Wireless door lock control system | 202307,999999,_58,_115226,_0510941,RM100000002C71N,
|
|
| Power distribution box assembly | 202307,999999,_57,_111968,_0500002,RM100000002BJZO,
|
|
| Power source mode does not change to ON (READY) | Hybrid control system | 202307,999999,_58,_115230,_0606512,RM100000002C25Y,
|
| Immobiliser function | ||
| Wire harness or connector | ||
| Shift lock control unit assembly | ||
| Stop light switch assembly | ||
| Certification ECU (Smart key ECU assembly) | ||
| New key cannot be registered | LIN communication system | 202307,999999,_58,_115230,_0606512,RM100000002C25Z,
|
| Meter / gauge system | ||
| Reregistration | ||
| Electrical key transmitter sub-assembly | ||
| ID code box (Immobiliser code ECU) | ||
| Certification ECU (Smart key ECU assembly) | ||
| Additional key cannot be registered | Smart entry and start system (for Start Function) | 202307,999999,_58,_115230,_0606512,RM100000002C260,
|
| Electrical key transmitter sub-assembly | ||
| ID code box (Immobiliser code ECU) | ||
| Certification ECU (Smart key ECU assembly) | ||
| New key registration warning message is not displayed | Lighting system (int) | 202307,999999,_58,_115230,_0606512,RM100000002C261,
|
| Meter / gauge system | ||
| Certification ECU (Smart key ECU assembly) | ||
| Security indicator light does not blink | Wire harness or connector | 202307,999999,_58,_115230,_0606512,RM100000002C265,
|
| Security indicator light (Combination meter assembly) | ||
| Main body ECU (Multiplex network body ECU) | ||
| Certification ECU (Smart key ECU assembly) | ||
| Immobiliser system does not operate properly | Communication ID registration was defective | 202307,999999,_58,_115230,_0606512,RM100000002C266,
|
| Wire harness or connector | ||
| ID code box (Immobiliser code ECU) | ||
| Hybrid vehicle control ECU | ||
| System malfunction message is displayed on the multi-information display | Smart entry and start system (for Entry Function)*2 | 202307,999999,_58,_115230,_0606512,RM100000002C262,
|
| Smart entry and start system (for Start Function) | ||
| Certification ECU (Smart key ECU assembly) | ||
| Electronically controlled brake system | ||
| Hybrid control system cannot be started by remote engine start and stop (Both the wireless door lock control system and push-button start function operate normally)*1 | Refer to "Remote Engine Starter does not Operate" | 202307,999999,_56,_115231,_0512170,RM100000002BWEV,
|
*1: w/ Remote Engine Starter System
*2: w/ Entry Function