RM38T0EC _56 Audio / Visual / Telematics _115231 TELEMATICS _0512170 TELEMATICS SYSTEM(for TOYOTA Connect) J

TELEMATICS TELEMATICS SYSTEM(for TOYOTA Connect) Remote Engine Starter does not Operate

CAUTION / NOTICE / HINT

NOTICE:: ·

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Registration for Telematics System.

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for TOYOTA Connect)>REGISTRATION202201,999999,_56,_115231,_0512170,RM1000000020HE5,

·

Before replacing the telematics transceiver, refer to Service Bulletin.

1.CHECK SMART ENTRY AND START SYSTEM (for Start Function)

Check that the engine can be started by pressing the ignition switch.

Result:

Result	Proceed to
Engine can be started.	A
Engine cannot be started.	B

2.REGISTRATION

GO TO SMART ENTRY AND START SYSTEM (for Start Function)

for HEV Model:

for Gasoline Model:

2.REGISTRATION

HINT:: If registration is not performed after replacing any of the following parts, the remote engine start and stop will not be available.

·

Certification ECU (smart key ECU assembly)

·

DCM (telematics transceiver)

Perform remote engine start and stop registration.

Check if the problem symptom recurs.

Result:

Result	Proceed to
System does not return to normal.	A
System returns to normal.	B

3.CHECK DTC

END

3.CHECK DTC

Clear the DTCs.

Check for DTCs.

Result:

Result	Proceed to
DTC B228562 is not output.	A
DTC B228562 is output.	B

REPLACE TELEMATICS TRANSCEIVER

GO TO DTC B228562

for HEV Model:

for Gasoline Model: