RM3660EC _58 Vehicle Interior _080747 THEFT DETERRENT / KEYLESS ENTRY _0586355 THEFT DETERRENT SYSTEM(for NR Series Engine) Y

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT SYSTEM(for NR Series Engine)  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Use this procedure to troubleshoot the theft deterrent system.

·

*: Use the GTS.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS CHECK
2.CUSTOMER PROBLEM ANALYSIS CHECK
HINT:
·

In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

·

Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.

·

The following 5 items are important points for problem analysis:


What Vehicle model, system name
When Date, time, occurrence frequency, whether the problem occurred recently or has been occurring for a long time
Where Whether the problem occurs at a specific location
Under what conditions? Whether the doors were locked or unlocked, whether the engine switch was on (IG), whether the engine has started.
How did it happen? Problem symptoms


Result:
Proceed to
NEXT



NEXT

3.READ AND SAVE OPERATION HISTORY
3.READ AND SAVE OPERATION HISTORY
NOTICE:
·

If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before operation history has been read and saved, the operation history information could be lost.

·

The operation history function uses the current system time of the GTS and the time counter inside the controlling ECU to calculate the times shown in the operation history. For this reason, before reading the operation history, first make sure that the GTS system clock is accurately set to the current time.



a.

Read and save operation history using the GTS.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>THEFT DETERRENT SYSTEM (for NR Series Engine)>CHECK FOR INTERMITTENT PROBLEMS

Body Electrical > Main Body > Utility
Tester Display
Operation History
50005 123 1052

Result:
Proceed to
NEXT



NEXT

4.PRE-CHECK
4.PRE-CHECK
a.

Measure the battery voltage.

Standard Voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.


b.

Check the fuses and relays.


c.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.


Result:
Proceed to
NEXT



NEXT

5.SYMPTOM SIMULATION
5.SYMPTOM SIMULATION
Result:
Proceed to
NEXT



NEXT

6.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
7.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check the power door lock control system.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM (for NR Series Engine)>OPERATION CHECK

OK:

Power door lock control system is normal



Result:
Proceed to
OK
NG



OK

8.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

NG

8.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
a.

Check the wireless door lock control system.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM (for NR Series Engine)>OPERATION CHECK

OK:

Wireless door lock control system is normal



Result:
Proceed to
OK
NG



OK

9.CHECK SMART ENTRY AND START SYSTEM (for Entry Function)

NG

9.CHECK SMART ENTRY AND START SYSTEM (for Entry Function)
a.

Check the smart entry and start system (for Entry Function).

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>SMART ENTRY AND START SYSTEM (for Entry Function (NR Series))>OPERATION CHECK

OK:

Smart entry and start system (for Entry Function) is normal



Result:
Proceed to
OK
NG



OK

10.CHECK SMART ENTRY AND START SYSTEM (for Start Function)

NG

10.CHECK SMART ENTRY AND START SYSTEM (for Start Function)
a.

Check the smart entry and start system (for Start Function).

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>SMART ENTRY AND START SYSTEM (for Start Function, Gasoline Model (NR Series))>OPERATION CHECK

OK:

Smart entry and start system (for Start Function) is normal



Result:
Proceed to
OK
NG



OK

11.CHECK LIGHTING SYSTEM (EXT)

NG

11.CHECK LIGHTING SYSTEM (EXT)

Result:
Proceed to
OK
NG



OK

12.CHECK LIGHTING SYSTEM (INT)

NG

13.CHECK HORN SYSTEM
a.

Check the horn system.

OK:

Horn system is normal



Result:
Proceed to
OK
NG



OK

14.PROBLEM SYMPTOMS TABLE

NG

14.PROBLEM SYMPTOMS TABLE

Result:
Result Proceed to
Fault is not listed in Problem Symptoms Table (Fault can be simulated) A
Fault is not listed in Problem Symptoms Table (Fault cannot be simulated) B
Fault is listed in Problem Symptoms Table C



A

15.PERFORM OVERALL ANALYSIS AND TROUBLESHOOTING*

B

C

16.REPAIR OR REPLACE
16.REPAIR OR REPLACE
Result:
Proceed to
NEXT



NEXT

17.CONFIRMATION TEST
17.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END