CHECK CUSTOMIZE PARAMETERS
The operation check below is based on the non-customized initial condition of the vehicle.
CHECK BASIC FUNCTIONS
Check that all of the doors lock when the lock switch of the door control switch is pressed.
Check that all of the doors unlock when the unlock switch of the door control switch is pressed.
Check that all of the doors lock when the driver door key cylinder is turned to lock using the mechanical key.
Check that all of the doors unlock when the driver door key cylinder is turned to unlock using the mechanical key.
CHECK THE KEY LOCK-IN PREVENTION FUNCTION
In order to prevent the key from being locked in the vehicle, the following inspection should be performed with the driver door window open.
Turn the ignition switch to ON or ACC.
With the driver door open, check that all of the doors unlock immediately after the door lock knob for the driver door is pressed.
With the driver door open, check that all of the doors unlock immediately after the lock switch of the door control switch is pressed.
With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door while holding the outside handle open and check that all of the doors unlock.
CHECK THE SECURITY FUNCTION OF THE DOOR LOCK CONTROL SYSTEM
Close all of the doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)
Hold the outside handle of the driver door, open and close the door while holding the handle open (confirm that the lock knob remained in the lock position). Then, check that the doors do not unlock when the unlock switch of the door control switch is pressed from outside the vehicle.
Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock switch of the door control switch is pressed from outside the vehicle.
Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation or entry operation*. Then, check that the doors do not unlock when the unlock switch of the door control switch is pressed from outside the vehicle.
Check that the security function of the door lock control system is canceled under the following conditions:
The ignition switch is turned to ON.
The driver door is unlocked using the key.
The unlock switch of the door control switch is pressed after the door lock knob is unlocked manually.
The doors are unlocked by wireless operation.
The doors are unlocked by entry operation.
CHECK THE KEY-LINKED 2-STEP UNLOCK FUNCTION
The key-linked 2-step unlock function can be customized. Make sure that this customize setting is set to ON before performing this procedure.
Lock all doors.
Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and all of the doors unlock when it is turned to unlock again.