NAVIGATION / MULTI INFO DISPLAY NAVIGATION SYSTEM Panel Switches do not Function
CAUTION / NOTICE / HINT
- NOTICE:
-
When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
- ·
A communication malfunction DTC may be stored.
·The radio and display receiver assembly may not operate normally.
- HINT:
-
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
PROCEDURE
Check for foreign matter around the switches that might prevent operation.
- OK:
No foreign matter is found.
- Result:
Proceed to OK NG
OK
NG
Enter the "Panel & Steering Switch Check Mode" screen. Refer to Check Panel & Steering Switch in Operation Check.
Operate the abnormal switch and check if the switch status is correctly displayed.
- OK:
The switch status is correctly displayed as operated.
- Result:
Proceed to OK NG
OK
NG