PARK ASSIST / MONITORING CLEARANCE SONAR MAIN SWITCH INSTALLATION
CAUTION / NOTICE / HINT
- HINT:
- ·
Use the same procedure for RHD and LHD vehicles.
·The procedure listed below is for LHD vehicles.
PROCEDURE
84490A
1.INSTALL BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY
|
Install in this Direction |
Attach the claw to install the back sonar or clearance sonar switch assembly as shown in the illustration.
55447C
2.INSTALL NO. 2 SWITCH HOLE BASE
55670
3.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
55410C
4.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
55413D
5.INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL (for Full-trim)
55320
6.INSTALL LOWER NO. 2 INSTRUMENT PANEL ASSEMBLY (for Full-trim)
55434B
7.INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL (for Full-trim)
55646
8.INSTALL NO. 3 INSTRUMENT PANEL UNDER COVER (for Full-trim)
58534E
9.INSTALL CENTER FLOOR CARPET COVER LH (for Full-trim)
58533C
10.INSTALL CENTER FLOOR CARPET COVER RH (for Full-trim)
11.INSTALL CONSOLE BOX ASSEMBLY (for Full-trim, w/ Console Tray)
73900
12.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Full-trim, w/ Knee Airbag)
55313
13.INSTALL LOWER INSTRUMENT PANEL LH (for Full-trim, w/o Knee Airbag)
55445B
14.INSTALL INSTRUMENT PANEL FINISH PLATE (for Full-trim, w/o Knee Airbag)
55433B
15.INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for Full-trim)
55432D
16.INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for Full-trim)
77306
17.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY (for Full-trim)
53601
18.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for Full-trim)
55641
19.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER (for Full-trim)
55318C
20.INSTALL INSTRUMENT SIDE PANEL LH (for Full-trim)
62112
21.INSTALL COWL SIDE TRIM BOARD LH (for Full-trim)
67914B
22.INSTALL FRONT DOOR SCUFF PLATE LH (for Full-trim)
67912A
23.INSTALL FRONT DOOR OUTSIDE SCUFF PLATE LH (for Full-trim)
55438A
24.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL RETAINER (for Full-trim)
55312
25.INSTALL LOWER INSTRUMENT PANEL (for Full-trim)
55642
26.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER (for Full-trim)
55317A
27.INSTALL INSTRUMENT SIDE PANEL RH (for Full-trim)
55012A
28.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Full-trim)
55632B
29.INSTALL NO. 2 INSTRUMENT PANEL UNDER TRAY SUPPORT (for Full-trim)
62111C
30.INSTALL COWL SIDE TRIM BOARD RH (for Full-trim)
67913B
31.INSTALL FRONT DOOR SCUFF PLATE RH (for Full-trim)
- HINT:
-
Use the same procedure described for the LH side.
67911B
32.INSTALL FRONT DOOR OUTSIDE SCUFF PLATE RH (for Full-trim)
- HINT:
-
Use the same procedure described for the LH side.
55414A
33.INSTALL INSTRUMENT CLUSTER FINISH PANEL END (for Semi-trim)
55900
34.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
55405B
35.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)
35970F
36.INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transmission)
58840Q
37.INSTALL SHIFTING HOLE COVER ASSEMBLY (for Manual Transmission)
33504F
38.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
for Manual Transmission:
for Automatic Transmission:
33622
39.CONNECT NO. 1 SHIFT LEVER KNOB COVER (for Automatic Transmission)
55404E
40.INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
55044C
41.INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
55011A
42.INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
55631A
43.INSTALL NO. 1 INSTRUMENT PANEL UNDER TRAY STOPPER
44.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Full-trim, w/ Knee Airbag)
45. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (for Full-trim, w/ Knee Airbag)
- HINT:
-
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
46. PERFORM DIAGNOSTIC SYSTEM CHECK (for Full-trim, w/ Knee Airbag)
47.CHECK SRS WARNING LIGHT (for Full-trim, w/ Knee Airbag)