Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
73240
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)
Install the front seat belt anchor plate.
| *a | Protruding Part |
Install the front seat inner belt assembly LH with the nut.
Do not allow the front seat inner belt assembly LH to overlap the protruding part.
w/o Sub Wire Harness:
Attach the claw and clamp.
w/ Sub Wire Harness:
Attach the claw and clamp.
Connect the connector.
73230
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)
Install the front seat belt anchor plate.
| *a | Protruding Part |
Install the front seat inner belt assembly RH with the nut.
Do not allow the front seat inner belt assembly RH to overlap the protruding part.
w/ Seat Belt Warning System, w/o Front Seat Side Airbag:
Attach the claw and clamp.
Connect the connector.
w/ Seat Belt Warning System, w/ Front Seat Side Airbag:
Attach the claw and clamp.
Connect the 2 connectors.
71862K
3.INSTALL FRONT SEAT INNER CUSHION SHIELD LH (for Driver Side)
71861K
4.INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side)
5.INSTALL FRONT SEAT ASSEMBLY LH
6.INSTALL FRONT SEAT ASSEMBLY RH
Use the same procedure described for the LH side.
7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)
8. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (w/ Front Seat Side Airbag)
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
9. PERFORM DIAGNOSTIC SYSTEM CHECK (w/ Front Seat Side Airbag)
10.CHECK SRS WARNING LIGHT (w/ Front Seat Side Airbag)
11.INSPECT SEAT BELT WARNING SYSTEM (w/ Seat Belt Warning System)