84250A
1.INSTALL STEERING PAD SWITCH ASSEMBLY
Engage the 2 claws and 6 guide pins to install the steering pad switch assembly.
Install the 2 screws.
Connect the connectors to the spiral cable sub-assembly.
45130
2.INSTALL STEERING WHEEL PAD ASSEMBLY
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (w/ Airbag System)
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
5.PERFORM DIAGNOSTIC SYSTEM CHECK
6.CHECK SRS WARNING LIGHT