1.ADJUST SPIRAL CABLE
864A2
2.INSTALL STEERING VIBRATION ECU (w/ Lane Departure Alert System)
45184
3.INSTALL LOWER STEERING WHEEL BOSS COVER
Install the lower steering wheel boss cover with the 3 screws.
45100
4.INSTALL STEERING WHEEL ASSEMBLY
Align the matchmarks on the steering wheel assembly and steering main shaft.
Install the steering wheel set bolt.
84250A
5.INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)
45116
6.INSTALL NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch)
Use the same procedure described for the steering pad switch assembly.
45130
7.INSTALL HORN BUTTON ASSEMBLY
8.INSPECT STEERING WHEEL CENTER POINT
9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (w/ Airbag System)
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
11.PERFORM DIAGNOSTIC SYSTEM CHECK
12.CHECK SRS WARNING LIGHT