Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
The procedure listed below is a representative example.
Use the same procedure for first row and second row, unless otherwise specified.
85861
1.INSTALL SEAT CLIMATE CONTROL ECU
Install the seat climate control ECU with the 2 nuts.
Connect the connector.
2.INSTALL REAR SEAT ASSEMBLY LH
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for First Row)
4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (for First Row)
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
5. PERFORM DIAGNOSTIC SYSTEM CHECK (for First Row)
6.CHECK SRS WARNING LIGHT (for First Row)
7.INSPECT SEAT BELT WARNING SYSTEM
8.INSPECT REAR SEAT ASSEMBLY
9.INSPECT SEAT HEATER SYSTEM