When the doors are closed, each power window regulator motor assembly can control its power window operation for approximately 43 seconds after the ignition switch is turned from ON to off by receiving operation permission signals from the main body ECU (multiplex network body ECU).
However, when approximately 43 seconds have elapsed, or the driver door or front passenger door is opened within approximately 43 seconds of the ignition switch being turned off, the power window regulator motor assembly stops operating.
During an auto operation, when 43 seconds have passed and key-off operation is prohibited, the power window stops immediately.
The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly.
If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system.
If the main body ECU (multiplex network body ECU) is replaced, refer to the Service Bulletin.
Check that the manual up and down function using the multiplex network master switch assembly and power window regulator switch assembly can operate the power windows.
Manual up and down function is normal.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check that the remote up and down function using the multiplex network master switch assembly can operate all the power windows.
Remote up and down function is normal.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check the key-off operation function.
| Result | Proceed to |
|---|---|
| Power window can still be operated even after opening driver door or front passenger door within approximately 43 seconds of ignition switch being turned off | A |
| Power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (All Doors) (for LHD) | B |
| Power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (All Doors) (for RHD) | C |
| Power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (Driver door power window) (for LHD) | D |
| Power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (Driver door power window) (for RHD) | E |
| Power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (Front passenger door power window) (for LHD) | E |
| Power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off (Front passenger door power window) (for RHD) | D |
A
B
C
D
E
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Door Courtesy SW | Courtesy light switch RH signal | OFF or ON | OFF: Front door courtesy light switch assembly RH closed
ON: Front door courtesy light switch assembly RH open |
for RHD |
| FL Door Courtesy SW | Courtesy light switch LH signal | OFF or ON | OFF: Front door courtesy light switch assembly LH closed
ON: Front door courtesy light switch assembly LH open |
for LHD |
| Tester Display |
|---|
| FR Door Courtesy SW |
| FL Door Courtesy SW |
On the GTS screen, ON or OFF is displayed accordingly.
| Result | Proceed to |
|---|---|
| OK (for LHD) | A |
| OK (for RHD) | B |
| NG | C |
A
B
C