RM35X0E _51 Engine / Hybrid System _078884 CRUISE CONTROL _0383150 LANE CONTROL SYSTEM T

CRUISE CONTROL  LANE CONTROL SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

If CAN communication system and lane control system DTCs are not output and any of the following problem symptoms exist, perform troubleshooting by checking the appropriate suspected areas in the order they are listed.

·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Lane Control System
Symptom Suspected Area Link
Lane control system cannot be enabled Steering pad switch circuit Click here
Adjust forward recognition camera
HINT:

Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.


Click here*1
Click here*2
The LDA indicator does not illuminate in white when the LDA main switch is operated Indicator circuit Click here
Steering pad switch circuit Click here
Combination meter assembly Click here
The LDA indicator does not illuminate in yellow when the LDA main switch is operated Indicator circuit Click here
Steering pad switch circuit Click here
Combination meter assembly Click here
Increase in cases that driver can see lane markers but system cannot detect lane markers Check if operating conditions are met Click here
Adjust forward recognition camera
HINT:

Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.


Click here*1
Click here*2
Lane control system is operating, but system operation is not displayed on multi-information display Data List/Active Test
(LDA Control)
Click here
Combination meter assembly Click here
Buzzer does not sound even when vehicle deviates from its lane. Combination meter assembly Click here
Lane control system is not canceled even when turn signal light switch is operated Data List/Active Test
(Check turn signal switch signal)
Click here
Turn signal light switch circuit Click here
Forward recognition camera Click here

*1: One Time Recognition

*2: Sequential Recognition