RM38T0EC _55 Steering _112287 POWER ASSIST SYSTEMS _0510880 POWER STEERING SYSTEM G

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1. CHECK STEERING EFFORT (TORQUE)

NOTICE:

These service operations may affect the SRS airbags. Be sure to read the precautionary notices concerning the SRS airbag system before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION


a.

Stop the vehicle on a level, paved surface and align the wheels straight ahead.




d.

Using a torque wrench, check that the steering wheel set bolt is properly tightened.

Torque:
62 N*m (632 kgf*cm, 46 ft.*lbf)


e.

Start the engine so that the power steering is ready to operate.


f.

Turn the steering wheel 90 degrees to the right and check steering effort (torque) with the steering wheel turned. Check in the opposite direction using the same method.

Standard Steering Effort (Reference):

5.5 N*m (56 kgf*cm, 49 in.*lbf) or less



g.

Align the front wheels facing straight ahead.


h.

Turn the ignition switch off.