RM38T0EC
_58
Vehicle Interior
_112290
POWER OUTLETS (INT)
_0606057
WIRELESS CHARGING SYSTEM
T
POWER OUTLETS (INT) WIRELESS CHARGING SYSTEM PROBLEM SYMPTOMS TABLE
- HINT:
- ·
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
·Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | Link |
|---|---|---|
| Even when the wireless charging system is turned on, the indicator light (green) does not illuminate | Wireless charger power source circuit |  202307,999999,_58,_112290,_0606057,RM100000002C0QS,
|
| Mobile wireless charger cradle assembly | 202307,999999,_58,_112290,_0601633,RM100000002BHA2,
|
|
| When the wireless charging system is turned on, the indicator (green) illuminates, but the indicator (red) does not illuminate when a rechargeable device is placed on the charging area (wireless charging does not start) | Operate the ignition switch and confirm that the power source mode is ON or ACC | - |
| Check that the device being used is a Qi-compatible rechargeable device | - | |
| Remove any cases and accessories | - | |
| Check that a flat object or a gap with a thickness of 2.0 mm (0.079 in.) or more is not present between the compatible device (without a cover or any accessories attached) and the charging area | - | |
| Check that a flat object or small item with a thickness of 2.0 mm (0.079 in.) or more is not placed between the compatible device and the charging area | - | |
| Check that the rechargeable device is not fully charged | - | |
| Check that the compatible device is placed in the charging area on the charging tray | 202307,999999,_58,_112290,_0606057,RM100000002C0QP,
|
|
| Check that the rechargeable device is placed on the charging area with its charging surface facing down | - | |
| Check that the vehicle is not in an environment where it may be affected by strong radio waves or electrical noise | - | |
| Check that there is not more than 1 compatible device placed on the charging tray | - | |
| Check that a charging cable is not connected to the rechargeable device | - | |
| Check that the temperature of the compatible device is within the charging temperature range of the device | - | |
| Check if wireless charging of the rechargeable device is possible using another Qi-compatible wireless charging system | - | |
| Check operation using a compatible device other than the device that is reported to be malfunctioning | - | |
| Status signal circuit | 202307,999999,_58,_112290,_0606057,RM100000002C0QT,
|
|
| Mobile wireless charger cradle assembly | 202307,999999,_58,_112290,_0601633,RM100000002BHA2,
|
|
| When the wireless charging system is turned on, the indicator (green) illuminates and when a rechargeable device is placed on the charging area, the indicator light (red) blink in pattern 1, but the indicator (green) illuminates again before wireless charging is completed (wireless charging does not complete) | Check if the rechargeable device has not been moved out of the charging area | - |
| Check that temperature of the rechargeable device is not excessively high or low | - | |
| Check that the vehicle is not in an environment where it may be affected by strong radio waves or electrical noise | - | |
| Check if the electrical key transmitter sub-assembly is not being detected | - | |
| Status signal circuit | 202307,999999,_58,_112290,_0606057,RM100000002C0QT,
|
|
| Mobile wireless charger cradle assembly | 202307,999999,_58,_112290,_0601633,RM100000002BHA2,
|
|
| The indicator light (red) blinks (pattern 2)* | Status signal circuit | 202307,999999,_58,_112290,_0606057,RM100000002C0QT,
|
| Mobile wireless charger cradle assembly | 202307,999999,_58,_112290,_0601633,RM100000002BHA2,
|
|
| The indicator light (red) blinks (pattern 2)* | Check that the device being used is a Qi-compatible rechargeable device | - |
| Remove any cases and accessories | - | |
| Check that a flat object or a gap with a thickness of 2.0 mm (0.079 in.) or more is not present between the compatible device (without a cover or any accessories attached) and the charging area | - | |
| Check that a flat object or small item with a thickness of 2.0 mm (0.079 in.) or more is not placed between the compatible device and the charging area | - | |
| Check that the compatible device is placed in the charging area on the charging tray | 202307,999999,_58,_112290,_0606057,RM100000002C0QP,
|
|
| Check that the rechargeable device is in the same position as when charging was started | - | |
| Check that temperature of the mobile wireless charger cradle assembly is not excessively high | - | |
| Mobile wireless charger cradle assembly | 202307,999999,_58,_112290,_0601633,RM100000002BHA2,
|
*: For details about the indicator blinking patterns, refer to System Description.