RM36D0EC _58 Vehicle Interior _083097 METER / GAUGE / DISPLAY _0694858 METER / GAUGE SYSTEM(for SFTM Made) J

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM(for SFTM Made)  Steering Pad Switch Circuit  


DESCRIPTION

The combination meter assembly and steering pad switch assembly are connected via direct line. The main display and multi-information display in the combination meter assembly are operated using the switches of the steering pad switch assembly.

WIRING DIAGRAM

E498590E04
0.958,4.167 2.948,4.406 1.99,0.24 10 false Steering Pad Switch Assembly 3.323,4.177 5.146,4.438 1.823,0.26 10 false Spiral Cable Sub-assembly 4.99,1.969 6.208,2.417 1.219,0.448 10 false G18 5.844,2.552 7.031,2.958 1.188,0.406 10 false Combination Meter Assembly 5.052,1.771 5.604,2.021 0.552,0.25 10 false 32 5.76,1.865 6.313,2.115 0.552,0.25 10 false MSM+ 5.771,0.885 6.323,1.135 0.552,0.25 10 false MSTI 5.021,0.792 5.573,1.042 0.552,0.25 10 false 15 6.729,0.76 7.094,1.021 0.365,0.26 10 false 5 V 6.729,1.76 7.094,2.021 0.365,0.26 10 false 5 V 4.417,3.49 4.781,3.75 0.365,0.26 10 false G20 4.417,1.969 4.781,2.229 0.365,0.26 10 false G20 4.417,0.979 4.781,1.24 0.365,0.26 10 false G20 3.469,0.969 3.833,1.229 0.365,0.26 10 false z6 3.458,1.979 3.823,2.24 0.365,0.26 10 false z6 3.458,3.469 3.823,3.729 0.365,0.26 10 false z6 3.448,3.281 3.813,3.542 0.365,0.26 10 false 10 3.5,1.771 3.865,2.031 0.365,0.26 10 false 4 3.51,0.781 3.875,1.042 0.365,0.26 10 false 5 4.458,0.792 4.823,1.052 0.365,0.26 10 false 10 4.458,1.771 4.823,2.031 0.365,0.26 10 false 11 4.49,3.271 4.854,3.531 0.365,0.26 10 false 4 2.875,0.844 3.302,1.104 0.427,0.26 10 false +DP2 2.969,1.823 3.396,2.083 0.427,0.26 10 false +DP 3.021,3.365 3.448,3.625 0.427,0.26 10 false EAU 2.396,3.146 2.823,3.406 0.427,0.26 10 false Back 2.396,2.656 2.823,2.917 0.427,0.26 10 false Enter 0.917,1.646 1.344,1.906 0.427,0.26 10 false Left 0.885,3.167 1.313,3.427 0.427,0.26 10 false Right 0.875,2.625 1.302,2.885 0.427,0.26 10 false Down 0.948,2.167 1.375,2.427 0.427,0.26 10 false Up 4.021,1.875 4.448,2.135 0.427,0.26 10 false +DP 3.917,0.865 4.344,1.125 0.427,0.26 10 false +DP2 3.969,3.396 4.396,3.656 0.427,0.26 10 false EAU 4.979,0.979 6.198,1.427 1.219,0.448 10 false G18 5.365,0.99 5.979,1.188 0.615,0.198 10 false G150 5.344,1.979 5.958,2.177 0.615,0.198 10 false G150 5.438,1.188 5.75,1.385 0.313,0.198 10 false *2 5.042,2.177 5.354,2.375 0.313,0.198 10 false *1 5.063,1.188 5.375,1.385 0.313,0.198 10 false *1 5.438,2.198 5.75,2.396 0.313,0.198 10 false *2 5.448,1.781 5.76,1.979 0.313,0.198 10 false 29 5.427,0.771 5.74,0.969 0.313,0.198 10 false 12 0.188,4.5 3.771,4.813 3.583,0.313 10 false *1: except 12.3 Inch Multi-information Display Type 3.521,4.521 6.448,4.771 2.927,0.25 10 false *2: for 12.3 Inch Multi-information Display Type

CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

·

The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for SFTM Made)>PRECAUTION



PROCEDURE

1.READ VALUE USING GTS
a.

Using the GTS, read the Data List.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM (for SFTM Made)>DATA LIST / ACTIVE TEST

Body Electrical > Combination Meter > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Multi Switch (Up) Steering pad switch assembly (up switch) signal OFF or ON OFF: Steering pad switch assembly (up switch) released
ON: Steering pad switch assembly (up switch) pushed 		-
Multi Switch (Down) Steering pad switch assembly (down switch) signal OFF or ON OFF: Steering pad switch assembly (down switch) released
ON: Steering pad switch assembly (down switch) pushed 		-
Multi Switch (Left) Steering pad switch assembly (left switch) signal OFF or ON OFF: Steering pad switch assembly (left switch) released
ON: Steering pad switch assembly (left switch) pushed 		-
Multi Switch (Right) Steering pad switch assembly (right switch) signal OFF or ON OFF: Steering pad switch assembly (right switch) released
ON: Steering pad switch assembly (right switch) pushed 		-
Multi Switch (Enter) Steering pad switch assembly (enter switch) signal OFF or ON OFF: Steering pad switch assembly (enter switch) released
ON: Steering pad switch assembly (enter switch) pushed 		-
Multi Switch (Back) Steering pad switch assembly (back switch) signal OFF or ON OFF: Steering pad switch assembly (back switch) released
ON: Steering pad switch assembly (back switch) pushed 		-
Body Electrical > Combination Meter > Data List
Tester Display
Multi Switch (Up)
Multi Switch (Down)
Multi Switch (Left)
Multi Switch (Right)
Multi Switch (Enter)
Multi Switch (Back)
50003 409 12,13,14,15,16,17
OK:

Steering pad switch assembly condition displayed on the GTS changes with the actual switch operation.



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


NG

2.INSPECT STEERING PAD SWITCH ASSEMBLY
3.INSPECT SPIRAL CABLE SUB-ASSEMBLY
a.

Remove the spiral cable sub-assembly.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>REMOVAL


b.

Inspect the spiral cable sub-assembly.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>INSPECTION


Result:
Proceed to
OK
NG



OK

4.CHECK HARNESS AND CONNECTOR (SPIRAL CABLE SUB-ASSEMBLY - COMBINATION METER ASSEMBLY AND BODY GROUND)

NG

REPLACE SPIRAL CABLE SUB-ASSEMBLY

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>REMOVAL


4.CHECK HARNESS AND CONNECTOR (SPIRAL CABLE SUB-ASSEMBLY - COMBINATION METER ASSEMBLY AND BODY GROUND)

*1: except 12.3 Inch Multi-information Display Type

*2: for 12.3 Inch Multi-information Display Type


a.

Disconnect the G20 spiral cable sub-assembly connector.


b.

Disconnect the G18*1 or G150*2 combination meter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
except 12.3 Inch Multi-information Display Type
Tester Connection Condition Specified Condition
G20-10 (+DP2) - G18-15 (MSTI) Always Below 1 Ω
G20-11 (+DP) - G18-32 (MSM+) Always Below 1 Ω
G20-4 (EAU) - Body ground Always Below 1 Ω
G20-10 (+DP2) or G18-15 (MSTI) - Body ground Always 10 kΩ or higher
G20-11 (+DP) or G18-32 (MSM+) - Body ground Always 10 kΩ or higher

for 12.3 Inch Multi-information Display Type
Tester Connection Condition Specified Condition
G20-10 (+DP2) - G150-12 (MSTI) Always Below 1 Ω
G20-11 (+DP) - G150-29 (MSM+) Always Below 1 Ω
G20-4 (EAU) - Body ground Always Below 1 Ω
G20-10 (+DP2) or G150-12 (MSTI) - Body ground Always 10 kΩ or higher
G20-11 (+DP) or G150-29 (MSM+) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR