RM36D0EC _58 Vehicle Interior _083103 SEAT BELT _0587288 OCCUPANT DETECTION SENSOR(for GTMC Made Power Seat) A

SEAT BELT  OCCUPANT DETECTION SENSOR(for GTMC Made Power Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·
B543257

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



PROCEDURE

Hide 71511S 1.INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)

HINT:

When installing a separate type front seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for SFTM Made Manual Seat)>PRECAUTION


a.
B521401

Attach the hook to install the separate type front seat cushion pad (occupant detection sensor).

NOTICE:

Be careful not to damage the separate type front seat cushion cover.



b.
B532232C01
0.917,1.844 1.688,1.604 true 0.708,1.771 1.021,1.969 0.313,0.198 10 false *a
*a Band
V113147

Install in this Direction


Attach the band as shown in the illustration.


Hide 2.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

HINT:

Use the same procedure described for the Driver side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for GTMC Made Power Seat)>REASSEMBLY


Hide 3.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

HINT:

Use the same procedure described for the Driver side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for GTMC Made Power Seat)>REASSEMBLY


Hide 71867V 6.INSTALL FRONT SEAT FRONT CUSHION SHIELD RH

HINT:

Use the same procedure described for the Driver side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for GTMC Made Power Seat)>REASSEMBLY


Hide 7.INSTALL FRONT SEAT ASSEMBLY RH

HINT:

Use the same procedure described for the Driver side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for GTMC Made Power Seat)>INSTALLATION


Hide 8. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART