Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Use the same procedure for the RH and LH sides.
The following procedure is for the LH side.
71072S
1.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (FRONT SEAT CUSHION HEATER)
When installing a separate type front seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.
Attach the hook and install the separate type front seat cushion cover (front seat cushion heater).
Be careful not to dirty or damage the separate type front seat cushion cover (front seat cushion heater).
| *a | Band |
|
Install in this Direction |
Attach the band.
2.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
3.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
71862
4.INSTALL FRONT SEAT INNER CUSHION SHIELD LH (for Driver Side)
71861
5.INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side)
71812D
6.INSTALL FRONT SEAT CUSHION SHIELD LH (for Driver Side)
71811D
7.INSTALL FRONT SEAT CUSHION SHIELD RH (for Front Passenger Side)
71868A
8.INSTALL FRONT SEAT NO. 1 INNER CUSHION SHIELD LH
9.INSTALL FRONT SEAT ASSEMBLY LH
10. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
11. PERFORM DIAGNOSTIC SYSTEM CHECK
12.CHECK SRS WARNING LIGHT
13.INSPECT SEAT BELT WARNING SYSTEM
14.INSPECT FRONT POWER SEAT CONTROL SYSTEM
15.INSPECT SEAT HEATER SYSTEM
16.INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)