RM3660EC _58 Vehicle Interior _080741 SUPPLEMENTAL RESTRAINT SYSTEMS _0610731 AIRBAG SYSTEM(for NR Series Engine) D

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(for NR Series Engine)  OPERATION CHECK  


PRECAUTION FOR OPERATION CHECK


CAUTION:
C376913

Use the correct procedure to replace the airbag parts.



CHECK SRS WARNING LIGHT


a.

Primary check

i.

Turn the ignition switch to ON and check that the SRS warning light comes on.


ii.

Turn the ignition switch off. Wait for at least 2 seconds, then turn the ignition switch to ON. The SRS warning light comes on for approximately 6 seconds and diagnosis of the airbag system is performed.

HINT:
·

If the SRS warning light remains on for approximately 6 seconds or more after the ignition switch has been turned to ON, there may be a malfunction in the SRS airbag system.

·

If the SRS warning light occasionally turns on approximately 6 seconds or more after the ignition switch has been turned to ON, there may be a short to +B, short to ground or an open in the SRS warning light circuit.

·

If the SRS warning light illuminates after turning the ignition switch off or to ACC, there may be a malfunction in the power source circuit or combination meter assembly.

·

The SRS warning light turns off, and then turns on. This blinking pattern indicates a power source voltage drop. The SRS warning light turns off 10 seconds after the power source voltage returns to normal.






CHECK HORN BUTTON ASSEMBLY


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>STEERING PAD>ON-VEHICLE INSPECTION


CHECK INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT PASSENGER AIRBAG ASSEMBLY>ON-VEHICLE INSPECTION


CHECK LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>KNEE AIRBAG ASSEMBLY>ON-VEHICLE INSPECTION


CHECK FRONT SEAT AIRBAG ASSEMBLY


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT SEAT SIDE AIRBAG ASSEMBLY>ON-VEHICLE INSPECTION


CHECK FRONT SEAT CUSHION AIRBAG ASSEMBLY


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SRS SEAT CUSHION AIRBAG ASSEMBLY>ON-VEHICLE INSPECTION


CHECK CURTAIN SHIELD AIRBAG ASSEMBLY


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>CURTAIN SHIELD AIRBAG ASSEMBLY>ON-VEHICLE INSPECTION


CHECK FRONT SEAT OUTER BELT ASSEMBLY


Click hereVehicle Interior>SEAT BELT>FRONT SEAT OUTER BELT ASSEMBLY>ON-VEHICLE INSPECTION


CHECK REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY


Click hereVehicle Interior>SEAT BELT>REAR SEAT OUTER BELT ASSEMBLY>ON-VEHICLE INSPECTION


CHECK AIRBAG SENSOR WITH ECU ASSEMBLY


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>CENTER AIRBAG SENSOR ASSEMBLY>ON-VEHICLE INSPECTION


CHECK FRONT AIRBAG SENSOR


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT AIRBAG SENSOR>ON-VEHICLE INSPECTION


CHECK SIDE AIRBAG PRESSURE SENSOR


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SIDE AIRBAG SENSOR>ON-VEHICLE INSPECTION


CHECK SIDE NO. 2 AIRBAG SENSOR


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>REAR AIRBAG SENSOR>ON-VEHICLE INSPECTION


CHECK HARNESS AND CONNECTOR


a.

for Vehicle not Involved in Collision

i.

Perform a diagnostic system check.



b.

for Vehicle Involved in Collision and Airbag not Deployed

i.

Perform a diagnostic system check.



c.

for Vehicle Involved in Collision and Airbag is Deployed

i.

Perform a diagnostic system check.


ii.

Check any of the wire harnesses in exposed contact with the airbag wire harness for damage.


iii.

Check the connector of the airbag wire harness for scratches, cracks or damage.