SUPPLEMENTAL RESTRAINT SYSTEMS STEERING PAD ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
- CAUTION:
-
-
Be sure to correctly follow the removal and installation procedures for the horn button assembly.
PROCEDURE
45130
1.INSPECT HORN BUTTON ASSEMBLY (for Vehicle not Involved in Collision)
Perform a diagnostic system check.
for NR Series Engine: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for NR Series Engine)>DTC CHECK / CLEAR202307,999999,_58,_080741,_0610731,RM100000002CH03,
Visually check for defects with the horn button assembly installed to the vehicle.
- HINT:
-
The defects are as follows:
- ·
Cuts on the surface or in the grooves
·Small cracks on the surface or in the grooves
·Significant discoloration on the surface or in the grooves
- OK:
No defects are found.
If any defects are found, replace the horn button assembly with a new one.
45130
2.INSPECT HORN BUTTON ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check.
for NR Series Engine: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for NR Series Engine)>DTC CHECK / CLEAR202307,999999,_58,_080741,_0610731,RM100000002CH03,
Visually check for defects with the horn button assembly removed from the vehicle.
- HINT:
-
The defects are as follows:
- ·
Cuts on the surface or in the grooves
·Small cracks on the surface or in the grooves
·Significant discoloration on the surface or in the grooves
·Cracks or other damage to the connector
·Deformation of the steering wheel assembly
·Deformation of the installation surface of the horn button assembly
·Interference or uneven clearance between the horn button assembly and steering wheel assembly when a new horn button assembly is installed to the steering wheel assembly
- OK:
No defects are found.
If any defects are found, replace the horn button assembly or steering wheel assembly with a new one.