K313 CVT  SHIFT LEVER  INSTALLATION  

1.01,1.885 1.167,2.083 0.156,0.198 10 true 1 0.708,1.146 0.865,1.344 0.156,0.198 10 true 3 2.25,0.854 2.406,1.052 0.156,0.198 10 true 2 2.594,1.542 2.75,1.74 0.156,0.198 10 true 4

Temporarily install the transmission floor shift assembly to the vehicle body with the 4 bolts.

Push the 2 claws together at the top of the lock piece. While holding the 2 claws together, push the 2 lugs on the bottom of the lock piece toward each other and upward to push up the lock piece.

0.323,1.177 2.99,2.604 2.667,1.427 1.552,0.646 1.552,0.167 1.552,0.167 1.667,0.167 false 5.271,1.125 5.271,0.646 5.271,0.646 5.385,0.646 false 1.74,0.073 1.948,0.26 0.208,0.188 10 false *a 0.385,1.219 0.604,1.427 0.219,0.208 10 false *b 5.229,1.906 5.458,2.115 0.229,0.208 10 false *d 5.448,0.552 5.708,0.76 0.26,0.208 10 false *a 1.094,0.344 1.344,0.573 0.25,0.229 10 false *c 1.969,0.333 2.208,0.552 0.24,0.219 10 false *c 1.531,1.229 1.708,1.469 0.177,0.24 10 false *c 1.542,2.354 1.771,2.552 0.229,0.198 10 false *c

*a	Lock Piece	*b	Bottom View
*c	Push	*d	Push up

Turn the nut of the transmission control cable assembly approximately 180° counterclockwise. While holding the nut in place, push in the stopper until it clicks twice.

1.219,0.99 1.427,0.542 1.427,0.542 1.552,0.542 false 0.708,2.115 0.823,2.115 0.823,2.115 1.052,1.625 false 1.583,0.438 1.854,0.656 0.271,0.219 10 false *a 0.542,2.031 0.771,2.229 0.229,0.198 10 false *b 3.281,0.604 3.573,0.792 0.292,0.188 10 false *c 1.333,1.01 1.542,1.219 0.208,0.208 10 false *d

*a	Stopper	*b	Nut
*c	Push in	*d	Turn approximately 180°

HINT:

If the stopper cannot be pushed in, slightly turn the nut clockwise and then push in the stopper again.

Connect the transmission control cable assembly to the transmission floor shift assembly. Check that the spring is positioned at (A) and push in the stopper.

1.135,0.813 1.354,0.25 1.354,0.25 1.479,0.25 false 1.615,2.375 1.615,2.063 false 3.51,1.146 4.729,2.333 4.729,2.333 5.906,1.156 true 5.958,1.052 6.146,0.542 6.146,0.542 6.292,0.542 true 1.354,0.885 1.479,0.594 1.479,0.594 1.625,0.594 false 3.542,1.042 3.729,0.531 3.729,0.531 3.875,0.531 true 1.552,2.396 1.865,2.552 0.313,0.156 10 false *1 1.531,0.146 1.813,0.323 0.281,0.177 10 false *a 4.677,2.365 4.927,2.563 0.25,0.198 10 false *b 3.094,0.646 3.385,0.885 0.292,0.24 10 false *d 3.938,0.448 4.104,0.635 0.167,0.188 10 false A 1.667,0.49 1.979,0.688 0.313,0.198 10 false *c 6.354,0.458 6.521,0.646 0.167,0.188 10 false A

*1	Transmission Floor Shift Assembly	-	-
*a	Stopper	*b	Spring
*c	Nut	*d	Push in

NOTICE:

·

If the stopper cannot be pushed in, slightly turn the nut clockwise and then push in the stopper again.

·

Make sure that the transmission control cable assembly is securely locked.

·

Do not forcibly pull the transmission control cable assembly into the cabin.

1.323,2.333 1.5,2.333 1.5,2.333 1.604,2.594 false 1.146,2.229 1.396,2.469 0.25,0.24 10 false *a

*a	Lock Piece
	Connect in this Direction

Confirm that the shift lever is in N, and then connect the end of the transmission control cable assembly to the transmission floor shift assembly.

NOTICE:

·

Securely connect the end of the transmission control cable assembly to the transmission floor shift assembly.

·

Connect the end of the transmission control cable assembly so that its adjustment lock section is on the driver side.

0.99,0.479 1.125,0.479 1.125,0.479 1.26,0.99 false 1.99,0.302 1.854,0.302 1.854,0.302 1.76,0.76 false 2.052,0.208 2.313,0.417 0.26,0.208 10 false *a 0.813,0.396 1.104,0.594 0.292,0.198 10 false *b 1.698,2.979 2.01,3.135 0.313,0.156 10 false *c

*a	Lock Piece
*b	Adjuster Case
*c	Push in

Push the lock piece into the adjuster case.

NOTICE:

·

Check that the park/neutral position switch assembly and shift lever are in N.

·

Securely push in the lock piece until the 2 claws are engaged.

·

1.76,0.354 2.177,0.354 false 0.51,1.167 0.656,1.167 0.656,1.167 1.094,1.677 true 0.323,1.094 0.552,1.292 0.229,0.198 10 false *1 1.563,0.26 1.813,0.469 0.25,0.208 10 false *a

*1	Transmission Control Cable Assembly
*a	Lever Shaft

When pushing in the lock piece of the adjuster case to lock it, remove your hand from the lever shaft.

·

When pushing in the lock piece of the adjuster case to lock it, do not move the lever shaft or transmission control cable assembly forward or backward.

1.646,1.198 1.844,1.594 1.844,1.594 2,1.594 false 1.313,1.344 1.583,1.594 0.271,0.25 10 false *a 2.042,1.49 2.333,1.708 0.292,0.219 10 false *b

*a	Slide
*b	Adjuster Case Cover

Slide the adjuster case cover in the direction shown by the arrow.

1.115,4.052 1.323,4.052 1.323,4.052 1.708,3.354 true 0.875,2.75 1.146,2.75 1.146,2.75 1.75,3.073 false 0.875,0.604 1.146,0.604 1.146,0.604 1.75,0.927 false 1.083,1.875 1.292,1.875 1.292,1.875 1.677,1.177 true 1.854,1.302 2.156,1.542 0.302,0.24 10 false *a 0.906,1.781 1.219,1.938 0.313,0.156 10 false *b 0.948,3.958 1.24,4.188 0.292,0.229 10 false *b 0.708,0.5 0.958,0.74 0.25,0.24 10 false *c 0.708,2.646 0.958,2.885 0.25,0.24 10 false *c

*a	Pull Out
*b	Lock Piece
*c	Adjuster Case

Using a precision screwdriver, pull out the lock piece of the adjuster case.

0.448,1.208 0.625,1.208 0.625,1.208 1.729,1.49 true 2.188,1.26 2.896,2.208 2.896,2.208 2.208,3.479 true 0.49,3.177 0.708,3.177 0.708,3.177 1.385,3.438 true 0.26,1.115 0.573,1.271 0.313,0.156 10 false *a 2.01,0.365 2.323,0.521 0.313,0.156 10 false *b 2.948,2.104 3.26,2.26 0.313,0.156 10 false *c 0.281,3.104 0.594,3.26 0.313,0.156 10 false *a

*a	Lock Nut
*b	Push in
*c	Stopper

Turn the lock nut of the transmission control cable assembly counterclockwise. While holding the lock nut, push in the stopper.

0.552,0.24 0.75,0.24 0.75,0.24 0.927,0.521 true 2.146,0.188 2.344,0.188 2.344,0.188 2.646,0.427 true 0.354,0.156 0.667,0.313 0.313,0.156 10 false *a 1.927,0.094 2.24,0.25 0.313,0.156 10 false *a

*a

Stopper

Connect the transmission control cable assembly to the transmission floor shift assembly.

NOTICE:

·

After connection, check that the outer part of the stopper is as shown in the illustration.

·

Do not forcibly pull the transmission control cable assembly into the cabin.

Connect the transmission control cable assembly to the transmission floor shift assembly.

NOTICE:

·

Before connecting the transmission control cable assembly, check that the shift lever is in N.

·

Securely connect the end of the transmission control cable assembly to the transmission floor shift assembly.

0.885,0.594 1.083,0.594 1.083,0.594 1.438,1.188 true 2.188,1.76 2.031,1.76 2.031,1.76 1.75,1.302 true 1.51,1.469 1.719,1.677 0.208,0.208 10 true *a 2.208,1.656 2.448,1.854 0.24,0.198 10 true *b 0.677,0.49 0.865,0.688 0.188,0.198 10 true *c

*a	Push in
*b	Lock Piece
*c	Adjuster Case

Push in the lock piece of the adjuster case to lock it.

NOTICE:

·

1.76,0.354 2.177,0.354 false 0.51,1.167 0.656,1.167 0.656,1.167 1.094,1.677 true 0.323,1.094 0.552,1.292 0.229,0.198 10 false *1 1.563,0.26 1.813,0.469 0.25,0.208 10 false *a

*1	Transmission Control Cable Assembly
*a	Lever Shaft

When pushing in the lock piece of the adjuster case to lock it, remove your hand from the lever shaft.

·

When pushing in the lock piece of the adjuster case to lock it, do not move the lever shaft or transmission control cable assembly forward or backward.

0.917,1.865 1.094,1.865 1.094,1.865 1.417,1.417 true 1.396,4.458 1.573,4.458 1.573,4.458 1.75,3.76 true 0.76,4.406 0.938,4.406 0.938,4.406 1.448,3.823 true 0.708,1.771 0.906,1.969 0.198,0.198 10 true *a 0.563,4.302 0.74,4.5 0.177,0.198 10 true *a 1.198,4.354 1.385,4.552 0.188,0.198 10 true *b

*a	Adjuster Case Cover
*b	Lock Piece

Move the adjuster case cover in the direction shown by the arrow.

NOTICE:

If the adjuster case cover is not moved far enough so that the adjuster case cover engages the lock piece, the transmission control cable assembly will not be able to lock, and reliable shift operation will not be possible.