RM35X0E _58 Vehicle Interior _078337 METER / GAUGE / DISPLAY _0379907 METER / GAUGE SYSTEM J

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  Tachometer Malfunction  


DESCRIPTION

In this circuit, the combination meter assembly receives engine speed signals from the ECM via CAN communication. The combination meter assembly displays the engine speed calculated based on the data received from the ECM.

WIRING DIAGRAM

E407708E04
4.667,1.583 6.542,1.917 1.875,0.333 10 false Combination Meter Assembly 0.698,2.26 2.781,2.563 2.083,0.302 10 false : CAN Communication Line 1.677,1.604 3.323,2.042 1.646,0.438 10 false ECM

CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

·

Before replacing the ECM, refer to the Service Bulletin.



PROCEDURE

1.READ VALUE USING GTS
a.

Using the GTS, read the Data List.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST

Body Electrical > Combination Meter > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Engine RPM Engine speed Min.: 0 rpm, Max.: 12750 rpm Actual engine speed -
Body Electrical > Combination Meter > Data List
Tester Display
Engine RPM
50003 409 24
HINT:
·

When the Data List values of the ECUs match, an internal malfunction of the ECM is suspected.

·

When the Data List values of the ECUs do not match, a signal output error of the ECM or an internal malfunction of the combination meter assembly is suspected.



OK:

The Data List values of the ECUs do not match.



Result:
Proceed to
OK
NG (for 7GR-FKS)
NG (for 1GD-FTV)



OK

NG (for 7GR-FKS)

2.CHECK FOR DTC (SFI SYSTEM)

NG (for 1GD-FTV)

4.CHECK FOR DTC (ECD SYSTEM)
3.READ VALUE USING GTS
a.

Using the GTS, read the Data List.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST

Body Electrical > Combination Meter > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Engine RPM Engine speed Min.: 0 rpm, Max.: 12750 rpm Actual engine speed -
Body Electrical > Combination Meter > Data List
Tester Display
Engine RPM
50003 409 24
Powertrain > Engine > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Engine Speed Engine speed Min.: 0 rpm, Max.: 16383 rpm Actual engine speed -
Powertrain > Engine > Data List
Tester Display
Engine Speed
50003 372 211
HINT:
·

When the Data List values of the ECUs match, an internal malfunction of the ECM is suspected.

·

When the Data List values of the ECUs do not match, a signal output error of the ECM or an internal malfunction of the combination meter assembly is suspected.



OK:

The Data List values of the ECUs do not match.



Result:
Proceed to
OK
NG



OK

NG

4.CHECK FOR DTC (ECD SYSTEM)
a.

Check if ECD system DTCs are output.

w/ DPF: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ DPF)>DTC CHECK / CLEAR

w/ EGR Cooler: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ EGR Cooler)>DTC CHECK / CLEAR

w/o EGR Cooler: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/o EGR Cooler)>DTC CHECK / CLEAR

for Water Cooled Type Intercooler: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (for Water Cooled Type Intercooler)>DTC CHECK / CLEAR

w/ Urea SCR System: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ Urea SCR System)>DTC CHECK / CLEAR

w/ Exhaust Gas Temperature Sensor for EGR: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ Exhaust Gas Temperature Sensor for EGR)>DTC CHECK / CLEAR

Powertrain > Engine > Trouble Codes
50001 372

Result:
Proceed to
OK
NG



OK

5.READ VALUE USING GTS

NG

GO TO ECD SYSTEM

w/ DPF: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ DPF)>DIAGNOSTIC TROUBLE CODE CHART

w/ EGR Cooler: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ EGR Cooler)>DIAGNOSTIC TROUBLE CODE CHART

w/o EGR Cooler: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/o EGR Cooler)>DIAGNOSTIC TROUBLE CODE CHART

for Water Cooled Type Intercooler: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (for Water Cooled Type Intercooler)>DIAGNOSTIC TROUBLE CODE CHART

w/ Urea SCR System: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ Urea SCR System)>DIAGNOSTIC TROUBLE CODE CHART

w/ Exhaust Gas Temperature Sensor for EGR: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ Exhaust Gas Temperature Sensor for EGR)>DIAGNOSTIC TROUBLE CODE CHART


5.READ VALUE USING GTS
a.

Using the GTS, read the Data List.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST

Body Electrical > Combination Meter > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Engine RPM Engine speed Min.: 0 rpm, Max.: 12750 rpm Actual engine speed -
Body Electrical > Combination Meter > Data List
Tester Display
Engine RPM
50003 409 24
Powertrain > Engine > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Engine Speed Engine speed Min.: 0 rpm, Max.: 16383 rpm Actual engine speed -
Powertrain > Engine > Data List
Tester Display
Engine Speed
50003 372 211
HINT:
·

When the Data List values of the ECUs match, an internal malfunction of the ECM is suspected.

·

When the Data List values of the ECUs do not match, a signal output error of the ECM or an internal malfunction of the combination meter assembly is suspected.



OK:

The Data List values of the ECUs do not match.



Result:
Proceed to
OK
NG



OK

NG