Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
86101
1.INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)
w/o Navigation Antenna:
Attach the clamp to install the antenna cord sub-assembly.
w/ Navigation Antenna:
Connect the connector and attach the claw.
Attach the clamp to install the antenna cord sub-assembly.
w/ Telematics Transceiver:
Connect the connector and attach the claw.
Attach the clamp to install the antenna cord sub-assembly.
for Wagon, w/ Telematics Transceiver:
Connect the 2 connectors and attach the claw.
Attach the clamp to install the antenna cord sub-assembly.
86101
2.INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)
w/o Navigation Antenna:
Attach the clamp to install the antenna cord sub-assembly.
w/ Navigation Antenna:
Connect the connector and attach the claw.
Attach the clamp to install the antenna cord sub-assembly.
w/ Navigation Antenna, Digital Audio Broadcasting Antenna:
Connect the connector and attach the claw.
Attach the clamp to install the antenna cord sub-assembly.
w/ Navigation Antenna, Telematics Transceiver, Digital Audio Broadcasting Antenna:
Connect the 2 connectors and attach the claw.
Attach the clamp to install the antenna cord sub-assembly.
55844
3.INSTALL NO. 2 HEATER TO REGISTER DUCT
55845A
4.INSTALL NO. 3 HEATER TO REGISTER DUCT
55843A
5.INSTALL NO. 1 HEATER TO REGISTER DUCT
55990C
6.INSTALL CENTER DEFROSTER NOZZLE ASSEMBLY
7.INSTALL INSTRUMENT PANEL SAFETY PAD
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Passenger Airbag)
9. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (w/ Front Passenger Airbag)
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
10. PERFORM DIAGNOSTIC SYSTEM CHECK (w/ Front Passenger Airbag)
11.CHECK SRS WARNING LIGHT (w/ Front Passenger Airbag)