RM35X0E _58 Vehicle Interior _078601 SEAT _0399975 OCCUPANT DETECTION SENSOR(for Manual Captain Seat) A

SEAT  OCCUPANT DETECTION SENSOR(for Manual Captain Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below are for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

The procedure listed below is a representative example.

·

Use the same procedure for first row and second row, unless otherwise specified.



PROCEDURE

Hide 79136C 1.INSTALL NO. 1 SEAT CUSHION PAD LH (OCCUPANT DETECTION SENSOR)

HINT:

When installing a No. 1 seat cushion cover sub-assembly LH, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>PRECAUTION


a.
B552981C01
1.698,4.042 1.844,3.323 1.844,3.323 2.031,3.323 false 2.052,3.219 2.365,3.375 0.313,0.156 10 false *a 1.208,1.271 1.417,1.469 0.208,0.198 10 true (1) 2.104,1.271 2.313,1.469 0.208,0.198 10 true (2) 1.656,2.104 1.865,2.302 0.208,0.198 10 true (3) 1.104,2.104 1.313,2.302 0.208,0.198 10 true (4) 2.208,2.104 2.417,2.302 0.208,0.198 10 true (5) 0.583,1.177 0.792,1.375 0.208,0.198 10 true (6) 0.604,0.792 0.813,0.99 0.208,0.198 10 true (7) 0.615,0.417 0.823,0.615 0.208,0.198 10 true (8) 0.51,1.74 0.719,1.938 0.208,0.198 10 true (9) 0.354,2.146 0.635,2.354 0.281,0.208 10 true (10) 2.688,1.177 2.969,1.385 0.281,0.208 10 true (11) 2.656,0.792 2.938,1 0.281,0.208 10 true (12) 2.656,0.417 2.938,0.625 0.281,0.208 10 true (13) 2.76,1.75 3.042,1.958 0.281,0.208 10 true (14) 2.844,2.156 3.125,2.365 0.281,0.208 10 true (15)
*a Hog Ring Pliers


Using hog ring pliers, install the No. 1 seat cushion pad LH (occupant detection sensor) to the No. 1 seat cushion cover sub-assembly LH with 15 new hog rings in the order shown in the illustration.

NOTICE:
·

Be careful not to damage the No. 1 seat cushion cover sub-assembly LH.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 1 seat cushion cover sub-assembly LH.




b.
B552979C01
1.375,4.219 1.208,3.76 1.208,3.76 0.948,3.76 false 0.729,3.646 0.927,3.844 0.198,0.198 10 false *a
*a Hog Ring Pliers


Using hog ring pliers, install 6 new hog rings.

NOTICE:

Be careful not to damage the No. 1 seat cushion cover sub-assembly LH.



Hide 2.INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

a.

Set the separate type rear seat cushion cover with pad on the No. 1 seat cushion frame sub-assembly LH.


b.
B552977

Attach the claw and install the connector of the occupant detection sensor.


c.

Connect the connector of the occupant detection sensor.


d.

Attach the hook and clip.

B552975C01
3.125,1.573 3.469,2.156 3.469,2.156 3.75,1.573 true 1.719,1.813 1.958,2.031 0.24,0.219 12 true *A 3.365,2.177 3.625,2.396 0.26,0.219 12 true *B 4.74,1.823 4.979,2.042 0.24,0.219 12 true *A
*A for First Row *B for Second Row



e.

for First Row:

i.

Install the 4 clips.



f.

for Second Row:

i.

Install the 2 clips.



Hide 79077G 4.INSTALL NO. 2 SEAT INNER LEG COVER SUB-ASSEMBLY RH (for Second Row, w/o Power Supply Unit)

Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for Manual Captain Seat)>REASSEMBLY

Hide 72880C 14.INSTALL LH SEAT NO. 1 SEAT ARMREST ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 26. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (for First Row)

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART