HEATING / AIR CONDITIONING AMBIENT TEMPERATURE SENSOR REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during the ambient temperature sensor removal/installation are shown below.
| Replaced Part or Performed Procedure | Necessary Procedures | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |
|---|---|---|---|
·
Front television camera assembly (Including removal and installation) ·
Radiator grille assembly (Including removal and installation) ·
Front bumper assembly (Including removal and installation) |
Front television camera view adjustment | Panoramic view monitor system | ( 201906,202310,_56,_079315,_0396274,RM100000001IGR4,202310,999999,_56,_079315,_0396274,RM100000002G5L7,)
|
·
Front television camera assembly, radiator grille assembly or front bumper assembly ·
Television camera assembly ·
Side television camera assembly LH or outer rear view mirror assembly LH ·
Side television camera assembly RH or outer rear view mirror assembly RH |
Television camera view adjustment (Adjustment of all cameras)
|
Panoramic view monitor system | (201906,202310,_56,_079315,_0396274,RM100000001IGR4,202310,999999,_56,_079315,_0396274,RM100000002G5L7,)
|
- HINT:
- ·
When the front bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment.
PROCEDURE
1.REMOVE FRONT BUMPER ASSEMBLY
88790B
2.REMOVE THERMISTOR ASSEMBLY (AMBIENT TEMPERATURE SENSOR)
except Wagon:
Detach the clamp.
Disconnect the connector and remove the thermistor assembly (ambient temperature sensor).
for Wagon:
Detach the clamp.
Disconnect the connector and remove the thermistor assembly (ambient temperature sensor).