Use the same procedure for RHD and LHD vehicles.
The procedure below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart.
8598A
1.INSTALL DOOR CONTROL BATTERY
|
Nut |
|
Connector |
Connect the connector.
Install the door control battery with the 2 nuts.
Do not reuse the door control receiver that has been dropped.
2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
4.INSPECT SRS WARNING LIGHT
5. PERFORM DIAGNOSTIC SYSTEM CHECK