RM35X0E _58 Vehicle Interior _079257 SUPPLEMENTAL RESTRAINT SYSTEMS _0396679 AIRBAG SYSTEM(for Type C) C

SUPPLEMENTAL RESTRAINT SYSTEMS AIRBAG SYSTEM(for Type C) B166C Front Door Pressure Sensor RH B166F Front Door Pressure Sensor Threshold Malfunction (RH)

DESCRIPTION

The side collision sensor RH circuit consists of the airbag sensor assembly and side airbag pressure sensor RH.

The side airbag pressure sensor RH detects impacts to the vehicle and sends signals to the airbag sensor assembly to determine if the SRS should be deployed.

These DTCs are stored when a malfunction is detected in the side airbag pressure sensor RH or airbag sensor assembly.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Warning Indicate	Test Mode / Check Mode
B166C	Front Door Pressure Sensor RH	Either condition is met: · A side airbag pressure sensor RH malfunction. · An airbag sensor assembly malfunction.	· Side airbag pressure sensor RH · Airbag sensor assembly	Comes on	Not applicable
B166F	Front Door Pressure Sensor Threshold Malfunction (RH)	Either condition is met: · A side airbag pressure sensor RH malfunction. · An airbag sensor assembly malfunction.	· Side airbag pressure sensor RH · Airbag sensor assembly	Comes on	Not applicable

WIRING DIAGRAM

5.406,3.208 7.146,3.583 1.74,0.375 10 false Airbag Sensor Assembly 5.406,3.042 5.719,3.24 0.313,0.198 10 false W1 5.688,1.948 6.302,2.146 0.615,0.198 10 false PSR+ 5.688,2.677 6.302,2.875 0.615,0.198 10 false PSR- 4.365,1.938 4.823,2.135 0.458,0.198 10 false NW1 4.375,2.719 4.833,2.917 0.458,0.198 10 false NW1 2.521,1.948 2.979,2.146 0.458,0.198 10 false RN3 2.531,2.719 2.99,2.917 0.458,0.198 10 false RN3 1.125,1.917 1.74,2.115 0.615,0.198 10 false PSR+ 1.135,2.677 1.75,2.875 0.615,0.198 10 false PSR- 4.365,2.156 4.979,2.354 0.615,0.198 10 false PSR+ 2.49,2.156 3.104,2.354 0.615,0.198 10 false PSR+ 2.5,2.938 3.115,3.135 0.615,0.198 10 false PSR- 4.385,2.948 5,3.146 0.615,0.198 10 false PSR- 5.396,1.823 5.708,2.021 0.313,0.198 10 false 20 5.396,2.583 5.708,2.781 0.313,0.198 10 false 19 4.469,1.729 4.625,1.927 0.156,0.198 10 false 2 4.469,2.5 4.625,2.698 0.156,0.198 10 false 1 2.604,1.729 2.76,1.927 0.156,0.198 10 false 1 2.615,2.51 2.771,2.708 0.156,0.198 10 false 2 1.625,1.813 1.781,2.01 0.156,0.198 10 false 2 1.615,2.573 1.771,2.771 0.156,0.198 10 false 1 0.24,3.219 2.417,3.604 2.177,0.385 10 false Side Airbag Pressure Sensor RH 0.24,3.042 0.552,3.24 0.313,0.198 10 false R5

CAUTION / NOTICE / HINT

NOTICE:

After the engine switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>BEFORE DISCONNECTING BATTERY201902,999999,_V1,_081196,_0393338,RM100000001HX6Q,

When disconnecting and reconnecting the battery

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE201906,999999,_V1,_081196,_0393338,RM100000001JBY9,

HINT:: When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.; Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART201906,999999,_V1,_081196,_0393338,RM100000001IWEY,

After replacing the airbag sensor assembly, refer to initialization.

Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>WORK PROCEDURE201906,202005,_V1,_081196,_0393339,RM100000001IWEZ,202005,202107,_V1,_081196,_0393339,RM100000001M43S,202107,202208,_V1,_081196,_0393339,RM100000001WMAF,202208,999999,_V1,_081196,_0393339,RM1000000024IQN,

PROCEDURE

1.CHECK SIDE AIRBAG PRESSURE SENSOR RH

0.479,1.573 0.75,1.75 0.271,0.177 10 false *1 2.51,1.448 2.823,1.656 0.313,0.208 10 false *2

*1	Side Airbag Pressure Sensor LH
*2	Airbag Sensor Assembly

Turn the engine switch off.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

Interchange the side airbag pressure sensor RH with LH and connect the connectors to them.

Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.

Turn the engine switch on (IG), and wait for at least 60 seconds.

Clear the DTCs stored in memory.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for Type C)>DTC CHECK / CLEAR201906,999999,_58,_079257,_0396679,RM100000001IJ88,

Body Electrical > SRS Airbag > Clear DTCs: 50002 188

Turn the engine switch off.

Turn the engine switch on (IG), and wait for at least 60 seconds.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for Type C)>DTC CHECK / CLEAR201906,999999,_58,_079257,_0396679,RM100000001IJ88,

Body Electrical > SRS Airbag > Trouble Codes: 50001 188

Result:

Proceed to
DTC B166C or B166F is output
DTC B167A or B167E is output
DTCs B166C, B166F, B167A and B167E are not output

HINT:: Codes other than DTCs B166C, B166F, B167A and B167E may be output at this time, but they are not related to this check.

Turn the engine switch off.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

Return the side airbag pressure sensor LH and RH to their original positions and connect the connectors to them.

DTC B166C or B166F is output

REPLACE AIRBAG SENSOR ASSEMBLY

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>CENTER AIRBAG SENSOR ASSEMBLY>REMOVAL201906,999999,_58,_079257,_0384942,RM100000001IN22,

DTC B167A or B167E is output

REPLACE SIDE AIRBAG PRESSURE SENSOR RH

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SIDE AIRBAG SENSOR (for Front Door)>REMOVAL201906,999999,_58,_079257,_0384944,RM100000001IWA5,

DTCs B166C, B166F, B167A and B167E are not output

USE SIMULATION METHOD TO CHECK

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING201902,999999,_V1,_078841,_0386803,RM100000001GTWY,