RM35X0E _56 Audio / Visual / Telematics _078379 NAVIGATION / MULTI INFO DISPLAY _0380999 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  C1610  Camera ECU Malfunction  


DESCRIPTION

This DTC may be stored when a malfunction occurs in the parking assist monitor system.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1610 Camera ECU Malfunction Malfunction occurs in the parking assist monitor system
·

Parking assist monitor system*1

·

Panoramic view monitor system*2

·

Radio and display receiver assembly



*1: w/ Parking Assist Monitor System

*2: w/ Panoramic View Monitor System


CAUTION / NOTICE / HINT

NOTICE:

When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:

·

A communication malfunction DTC may be stored.

·

The radio and display receiver assembly may not operate normally.



HINT:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>PRECAUTION


PROCEDURE

1.CHECK MODEL
a.

Choose the model to be inspected.

Result:
Result Proceed to
w/ Parking Assist Monitor System A
w/ Panoramic View Monitor System B




A

2.CHECK DTC (PARKING ASSIST MONITOR SYSTEM)

B

4.CHECK DTC (PANORAMIC VIEW MONITOR SYSTEM)
2.CHECK DTC (PARKING ASSIST MONITOR SYSTEM)

b.

Recheck for DTCs and check that no DTCs are output.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>DTC CHECK / CLEAR

Chassis > Rear Camera > Trouble Codes
50001 85
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

3.CHECK DTC (NAVIGATION SYSTEM)

NG

4.CHECK DTC (PANORAMIC VIEW MONITOR SYSTEM)
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DTC CHECK / CLEAR

Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
50002 353

b.

Recheck for DTCs and check that no DTCs are output.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DTC CHECK / CLEAR

Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
50001 353
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

5.CHECK DTC (NAVIGATION SYSTEM)

NG