RM35X0E _58 Vehicle Interior _079257 SUPPLEMENTAL RESTRAINT SYSTEMS _0385034 AIRBAG SYSTEM(for Type B) C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(for Type B)  B166C  Front Door Pressure Sensor RH  B166F  Front Door Pressure Sensor Threshold Malfunction (RH)  


DESCRIPTION

The side collision sensor RH circuit consists of the airbag sensor assembly, side airbag pressure sensor RH and No. 3 side airbag sensor RH.

The side airbag pressure sensor RH detects impacts to the vehicle and sends signals to the airbag sensor assembly to determine if the SRS should be deployed.

These DTCs are stored when a malfunction is detected in the side airbag pressure sensor RH or airbag sensor assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode
B166C Front Door Pressure Sensor RH Either condition is met:
·

A side airbag pressure sensor RH malfunction.

·

An airbag sensor assembly malfunction.


·

Side airbag pressure sensor RH

·

Airbag sensor assembly


Comes on Not applicable
B166F Front Door Pressure Sensor Threshold Malfunction (RH) Either condition is met:
·

A side airbag pressure sensor RH malfunction.

·

An airbag sensor assembly malfunction.


·

Side airbag pressure sensor RH

·

Airbag sensor assembly


Comes on Not applicable

WIRING DIAGRAM

C412956
4.042,2.094 5.656,2.656 1.615,0.563 10 false Airbag Sensor Assembly 4.052,1.927 4.885,2.125 0.833,0.198 10 false W1 4.146,0.875 4.979,1.073 0.833,0.198 10 false BBR+ 4.156,1.458 4.99,1.656 0.833,0.198 10 false BBR- 3.833,0.75 4.833,1.167 1,0.417 10 false 25 3.792,1.365 4.75,1.833 0.958,0.469 10 false 26 1.615,0.75 2.448,0.948 0.833,0.198 10 false 4 1.635,1.313 2.469,1.51 0.833,0.198 10 false 3 1.115,0.854 1.948,1.052 0.833,0.198 10 false BBR+ 1.125,1.469 1.958,1.667 0.833,0.198 10 false BBR- 1.115,2.698 1.948,2.896 0.833,0.198 10 false BDR+ 1.135,3.438 1.969,3.635 0.833,0.198 10 false BDR- 1.615,2.594 2.448,2.792 0.833,0.198 10 false 1 1.625,3.313 2.458,3.51 0.833,0.198 10 false 2 5.688,2.698 6.521,2.896 0.833,0.198 10 false BDR+ 5.698,3.469 6.531,3.667 0.833,0.198 10 false BDR- 0.552,4.021 2.344,4.385 1.792,0.365 10 false No. 3 Side Airbag Sensor RH 0.552,3.823 1.313,4.156 0.76,0.333 10 false S1 5.594,4.063 6.917,4.667 1.323,0.604 10 false Side Airbag Pressure Sensor RH 5.583,3.833 6.344,4.167 0.76,0.333 10 false R5 2.354,3.458 3.115,3.792 0.76,0.333 10 false SW2 2.365,2.698 3.125,3.031 0.76,0.333 10 false SW2 2.469,3.24 3.302,3.438 0.833,0.198 10 false 3 2.781,0.625 3.615,0.823 0.833,0.198 10 false 2 2.344,2.938 3.177,3.135 0.833,0.198 10 false BDR+ 2.375,3.719 3.208,3.917 0.833,0.198 10 false BDR- 5.427,2.573 6.26,2.771 0.833,0.198 10 false 2 5.438,3.323 6.271,3.521 0.833,0.198 10 false 1 2.667,0.865 3.427,1.198 0.76,0.333 10 false SW2 2.667,1.469 3.427,1.802 0.76,0.333 10 false SW2 4.583,2.479 4.74,2.677 0.156,0.198 10 false 1 3.542,2.49 3.698,2.688 0.156,0.198 10 false 2 3.531,3.26 3.688,3.458 0.156,0.198 10 false 1 4.594,3.25 4.75,3.448 0.156,0.198 10 false 2 2.792,1.25 2.948,1.448 0.156,0.198 10 false 1 2.469,2.469 3.865,3.094 1.396,0.625 10 false 4 3.427,2.698 3.885,2.896 0.458,0.198 10 false NW1 3.427,3.458 3.885,3.656 0.458,0.198 10 false NW1 4.5,2.698 4.958,2.896 0.458,0.198 10 false RN3 4.5,3.458 4.958,3.656 0.458,0.198 10 false RN3 3.406,2.938 4.021,3.135 0.615,0.198 10 false BDR+ 4.469,2.948 5.083,3.146 0.615,0.198 10 false BDR+ 3.406,3.719 4.021,3.917 0.615,0.198 10 false BDR- 4.479,3.729 5.094,3.927 0.615,0.198 10 false BDR- 2.677,1.094 3.51,1.292 0.833,0.198 10 false BDR+ 2.677,1.708 3.51,1.906 0.833,0.198 10 false BDR-

PROCEDURE

1.CHECK SIDE AIRBAG PRESSURE SENSOR RH
a.
C412958C01
0.427,1.563 0.698,1.74 0.271,0.177 10 false *1 2.833,1.552 3.146,1.76 0.313,0.208 10 false *2
*1 Side Airbag Pressure Sensor LH
*2 No. 3 Side Airbag Sensor RH


Turn the ignition switch off.


b.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.


c.

Interchange the side airbag pressure sensor RH with LH and connect the connectors to them.


d.

Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.


e.

Turn the ignition switch to ON, and wait for at least 60 seconds.


f.

Clear the DTCs stored in memory.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for Type B)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Clear DTCs
50002 188

g.

Turn the ignition switch off.


h.

Turn the ignition switch to ON, and wait for at least 60 seconds.


i.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for Type B)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Trouble Codes
50001 188
Result:
Proceed to
DTC B166C or B166F is output
DTC B167A or B167E is output
DTCs B166C, B166F, B167A and B167E are not output


HINT:

Codes other than DTCs B166C, B166F, B167A and B167E may be output at this time, but they are not related to this check.



j.

Turn the ignition switch off.


k.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.


l.

Return the side airbag pressure sensor LH and RH to their original positions and connect the connectors to them.



DTC B166C or B166F is output

DTC B167A or B167E is output

DTCs B166C, B166F, B167A and B167E are not output