Forward recognition camera receives the steering pad switch signals from the combination meter assembly via the CAN communication line. When the switch information sent from the combination meter assembly is abnormal, the forward recognition camera stores DTC B150E94.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| B150E94 | Instrument Panel Cluster (IPC) Control Module Unexpected Operation | When the switch information abnormality sent from the combination meter assembly is detected by the forward recognition camera | ·
Meter / gauge system ·
Forward recognition camera |
Front Recognition Camera |
When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
When the forward recognition camera has been replaced with a new one, make sure to clear all stored vehicle control history of each system and the forward recognition camera beam axis alignment data.
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Click hereADAS / AD>ADVANCED DRIVER ASSISTANCE SYSTEM>FRONT CAMERA (Production Date from 2023/04)>TARGET ADJUSTMENT(ONE TIME RECOGNITION)202201,999999,_95,_112293,_0580211,RM1000000028VIV,
Driving Adjustment: Click hereADAS / AD>ADVANCED DRIVER ASSISTANCE SYSTEM>FRONT CAMERA (Production Date from 2023/04)>DRIVING ADJUSTMENT202201,999999,_95,_112293,_0580211,RM1000000028VIX,
Camera Axis Adjustment Value Write: Click hereADAS / AD>ADVANCED DRIVER ASSISTANCE SYSTEM>FRONT CAMERA (Production Date from 2023/04)>CAMERA AXIS ADJUSTMENT VALUE WRITE202201,999999,_95,_112293,_0580211,RM1000000028VIY,
If the forward recognition camera has been replaced with a new one, make sure to perform Software Version Confirmation.
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Make sure that the DTC detection conditions are met.
If the detection conditions are not met, the system cannot detect the malfunction.
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTC B150E94 is not output | A |
| DTC B150E94 is output | B |
A
B
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
A
B