CHECK POWER DISTRIBUTION BOX ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *A | Main Body ECU (Multiplex Network Body ECU) with 3 connectors | - | - |
| *1 | Power Distribution Box Assembly | *2 | Main Body ECU (Multiplex Network Body ECU) |
| *A | Main Body ECU (Multiplex Network Body ECU) with 2 connectors | - | - |
| *1 | Power Distribution Box Assembly | *2 | Main Body ECU (Multiplex Network Body ECU) |
Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.
Connect the power distribution box assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| A-27 (IGR) - Body ground | Ignition power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| A-26 (BECU) - Body ground | Auxiliary battery power supply | Ignition switch off | 11 to 14 V |
| A-13 (GND1) - Body ground | Ground | Always | Below 1 Ω |
Install the main body ECU (multiplex network body ECU).
Measure the voltage and resistance, and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| 6E-9 - Body ground | BKUP LP relay drive signal input | Ignition switch off, shift lever not in R | 11 to 14 V |
| Ignition switch ON, shift lever in R | Below 1 V | ||
| 6E-3 (DRL) - Body ground | Daytime running light system drive output | Daytime running light system operating | Below 1 V |
| Daytime running light system not operating | 11 to 14 V | ||
| 6E-6 (HRLY) - Body ground | H-LP LH relay drive output | Light control switch in HEAD position | Below 1 V |
| Light control switch off position | 11 to 14 V | ||
| 6E-10 (HRY2) - Body ground | H-LP RH relay drive output | Light control switch in HEAD position | Below 1 V |
| Light control switch off | 11 to 14 V | ||
| 6F-30 - Body ground | Taillights and license plate lights drive output | Taillight illuminates | 11 to 14 V |
| Taillight not illuminates | Below 1 V | ||
| 6F-38 - Body ground | Back-up lights drive output | Ignition switch ON, shift lever not in R | Below 1 V |
| Ignition switch ON, shift lever in R | 11 to 14 V | ||
| 6E-18 - Body ground | Clearance lights and daytime running lights drive output | Parking lights and front side marker light illuminates | 11 to 14 V |
| Parking lights and front side marker light not illuminates | Below 1 V | ||
| G169-8 (CLTB) - G169-21 (CLTE) | Automatic light control sensor power supply output | Ignition switch ON | 11 to 14 V |
| G169-14 (AHBI) - Body ground | Auto high beam switch signal input | Auto high beam switch on | Below 1 V |
| Auto high beam switch off | 11 to 14 V | ||
| G169-15 (AHID) - Body ground | Auto high beam switch indicator drive output | Ignition switch ON, auto high beam switch on | Below 1 V |
| Ignition switch ON, auto high beam switch off | 11 to 14 V | ||
| G169-20 (CLTS) - Body ground | Automatic light control sensor signal input | Ignition switch off | Below 1 V |
| Ignition switch ON | Pulse generation
(See waveform 1) |
||
| G169-22 (DIM) - Body ground | High beam headlight drive output | Ignition switch ON, light control switch in HEAD position and dimmer switch in high or high flash position | Below 1 V |
| Ignition switch ON, dimmer switch not in high or high flash position | 11 to 14 V | ||
| G169-26 (HEAD) - Body ground | Light control switch HEAD position input | Light control switch in HEAD position | Below 1 V |
| Light control switch not in HEAD position | 11 to 14 V | ||
| G168-12 (LLEW) - Body ground | Light control LED ECU LH signal input | Ignition switch ON, light control switch off | 11 to 14 V |
| Ignition switch ON, light control switch in head position | Pulse generation | ||
| G168-13 (RLEW) - Body ground | Light control LED ECU RH signal input | Ignition switch ON, light control switch off | 11 to 14 V |
| Ignition switch ON, light control switch in head position | Pulse generation |
Waveform 1
| Item | Content |
|---|---|
| Tester Connection | G169-20 (CLTS) - Body ground |
| Tool setting | 2 V/DIV., 10 ms./DIV. |
| Condition | Ignition switch ON |
The communication waveform changes according to the surrounding brightness.
CHECK COMBINATION METER ASSEMBLY
for SFTM Made: Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM (for SFTM Made)>TERMINALS OF ECU202409,999999,_58,_083097,_0694858,RM100000002NUK0,
for GTMC Made: Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM (for GTMC Made)>TERMINALS OF ECU202405,999999,_58,_083097,_0694857,RM100000002LUOG,
CHECK FORWARD RECOGNITION CAMERA
CHECK STEERING SENSOR
for Gasoline Model: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>TERMINALS OF ECU202409,999999,_54,_083077,_0402316,RM100000002NJ2G,
for HV Model: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)>TERMINALS OF ECU202409,999999,_54,_083077,_0401811,RM100000002NJ94,
CHECK HYBRID VEHICLE CONTROL ECU (for HV Model)