According to the map light sub-assembly operation, the sliding roof ECU (sliding roof drive gear assembly [sliding roof]) or roof sunshade ECU (sliding roof drive gear assembly [roof sunshade]) operates its built-in motor. Using the map light sub-assembly, if the sliding roof glass or roof sunshade can be operated normally when 45 seconds or more have elapsed since the engine switch was turned off, the key-off operation function may be abnormal.
If the sliding roof ECU (sliding roof drive gear assembly [sliding roof]) or roof sunshade ECU (sliding roof drive gear assembly [roof sunshade]) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly [sliding roof]) or roof sunshade ECU (sliding roof drive gear assembly [roof sunshade]) must be initialized.
The panoramic moon roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.
Before replacing the main body ECU (multiplex network body ECU), refer to the Service Bulletin.
Check if the key-off operation function of the power window control system operates normally.
The key-off operation function of the power window control system operates normally.
| Proceed to |
|---|
| OK |
| NG |
OK
NG