The condition of the windshield wiper switch assembly is detected and sent to the steering sensor in this circuit.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Wiper OFF Switch | Front wiper switch OFF position signal | OFF or ON | OFF: Front wiper switch not in OFF position
ON: Front wiper switch in OFF position |
- |
| Wiper Auto/Int Switch | Front wiper switch AUTO*1 or INT*2 position signal | OFF or ON | OFF: Front wiper switch not in AUTO*1 or INT*2 position
ON: Front wiper switch in AUTO*1 or INT*2 position |
- |
| Wiper Lo Switch | Front wiper switch LO position signal | OFF or ON | OFF: Front wiper switch not in LO position
ON: Front wiper switch in LO position |
- |
| Wiper Hi Switch | Front wiper switch HI position signal | OFF or ON | OFF: Front wiper switch not in HI position
ON: Front wiper switch in HI position |
- |
| Wiper Mist Switch | Front wiper switch MIST position signal | OFF or ON | OFF: Front wiper switch not in MIST position
ON: Front wiper switch in MIST position |
- |
| Washer Switch | Washer switch Fr WASH position signal | OFF or ON | OFF: Washer switch not in Fr WASH position
ON: Washer switch in Fr WASH position |
- |
| Rear Wiper INT Switch | Rear wiper switch INT position signal | OFF or ON | OFF: Rear wiper switch not in INT position
ON: Rear wiper switch in INT position |
- |
| Rear Wiper ON Switch | Rear wiper switch Rr ON position signal | OFF or ON | OFF: Rear wiper switch not in ON position
ON: Rear wiper switch in ON position |
- |
| Rear Washer Switch | Washer switch Rr WASH position signal | OFF or ON | OFF: Washer switch not in Rr WASH position
ON: Washer switch in Rr WASH position |
- |
| Intermittent Time Volume (Shortest) | Intermittent time adjustment volume condition | OFF or ON | OFF: Windshield wiper switch assembly (auto sensitivity adjustment*1 or intermittent time adjustment*2 volume condition) not in P4 position
ON: Windshield wiper switch assembly (auto sensitivity adjustment*1 or intermittent time adjustment*2 volume condition) in P4 position |
*3 |
| Intermittent Time Volume (Shorter) | Intermittent time adjustment volume condition | OFF or ON | OFF: Windshield wiper switch assembly (auto sensitivity adjustment*1 or intermittent time adjustment*2 volume condition) not in P3 position
ON: Windshield wiper switch assembly (auto sensitivity adjustment*1 or intermittent time adjustment*2 volume condition) in P3 position |
*3 |
| Intermittent Time Volume (Longer) | Intermittent time adjustment volume condition | OFF or ON | OFF: Windshield wiper switch assembly (auto sensitivity adjustment*1 or intermittent time adjustment*2 volume condition) not in P2 position
ON: Windshield wiper switch assembly (auto sensitivity adjustment*1 or intermittent time adjustment*2 volume condition) in P2 position |
*3 |
| Intermittent Time Volume (Longest) | Intermittent time adjustment volume condition | OFF or ON | OFF: Windshield wiper switch assembly (auto sensitivity adjustment*1 or intermittent time adjustment*2 volume condition) not in P1 position
ON: Windshield wiper switch assembly (auto sensitivity adjustment*1 or intermittent time adjustment*2 volume condition) in P1 position |
*3 |
*1: w/ Auto Wiper System
*2: w/o Auto Wiper System
*3: Refer to Inspection for each position of the switch.
| Tester Display |
|---|
| Wiper OFF Switch |
| Wiper Auto/Int Switch |
| Wiper Lo Switch |
| Wiper Hi Switch |
| Wiper Mist Switch |
| Washer Switch |
| Rear Wiper INT Switch |
| Rear Wiper ON Switch |
| Rear Washer Switch |
| Intermittent Time Volume (Shortest) |
| Intermittent Time Volume (Shorter) |
| Intermittent Time Volume (Longer) |
| Intermittent Time Volume (Longest) |
The GTS display changes correctly in response to the windshield wiper switch assembly operation.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the windshield wiper switch assembly.
Inspect the windshield wiper switch assembly.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the steering wheel switch housing.
Inspect the steering wheel switch housing.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Disconnect the A81 windshield wiper relay assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(E60,A81)Location & Routingewd_type=routing;type=c,c;code=E60,A81 Click Connector(E60)Instrument Panel>Instrument Panel Wire / Radio Wiring Sub-Assy / Telephone Computer Wire>Steering Sensorewd_type=component;type=c;code=E60;pinno=2 Click Connector(A81)Instrument Panel>Engine Room Main Wire>Windshield Wiper Relay Assemblyewd_type=component;type=c;code=A81;pinno=3 |
||
| E60-2 (2S) - A81-3 (2S) | Always | Below 1 Ω |
| E60-2 (2S) or A81-3 (2S) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG