RM38N0EC _58 Vehicle Interior _111835 METER / GAUGE / DISPLAY _0504958 METER / GAUGE SYSTEM(for TFT Meter Type) J

METER / GAUGE / DISPLAY METER / GAUGE SYSTEM(for TFT Meter Type) Speedometer Malfunction

DESCRIPTION

FOR HV MODEL

The combination meter assembly receives vehicle speed signals from the No. 2 skid control ECU (brake actuator assembly) via CAN communication. The speed sensor detects the wheel speed and sends the appropriate signals to the No. 2 skid control ECU (brake actuator assembly). The No. 2 skid control ECU (brake actuator assembly) supplies power to the vehicle speed sensor. The No. 2 skid control ECU (brake actuator assembly) detects vehicle speed signals based on pulses of the voltage.

FOR GASOLINE MODEL

The combination meter assembly receives vehicle speed signals from the skid control ECU (brake actuator assembly) via CAN communication. The speed sensor detects the wheel speed and sends the appropriate signals to the skid control ECU (brake actuator assembly). The skid control ECU (brake actuator assembly) supplies power to the vehicle speed sensor. The skid control ECU (brake actuator assembly) detects vehicle speed signals based on pulses of the voltage.

WIRING DIAGRAM

FOR HV MODEL

0.677,2.271 3.042,2.521 2.365,0.25 10 false : CAN Communication Line 4.677,1.573 6.656,1.979 1.979,0.406 10 false Combination Meter Assembly 0.896,1.583 2.833,2.156 1.938,0.573 10 false No. 2 Skid Control ECU (Brake Actuator Assembly)

FOR GASOLINE MODEL

0.677,2.271 3.042,2.521 2.365,0.25 10 false : CAN Communication Line 4.677,1.594 6.656,2 1.979,0.406 10 false Combination Meter Assembly 1.083,1.594 2.635,2.073 1.552,0.479 10 false Skid Control ECU (Brake Actuator Assembly)

CAUTION / NOTICE / HINT

NOTICE:: ·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

·

When replacing any of the following ECUs, update the ECU security key.

Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>UPDATE ECU SECURITY KEY202111,999999,_V1,_111780,_0504977,RM100000001ZKRX,

-

Combination meter assembly

-

No. 2 skid control ECU (brake actuator assembly)*1

-

Skid control ECU (brake actuator assembly)*2

*1: for HV Model

*2: for Gasoline Model

·

Before starting the following inspection, check that the tire size and tire pressures are as specified.

Click hereSuspension>TIRE / WHEEL>TIRE AND WHEEL SYSTEM>INSPECTION202111,999999,_53,_111809,_0502514,RM100000001ZACU,

PROCEDURE

1.CONFIRM MODEL

Choose the model to be inspected.

Result:

Result	Proceed to
for HV Model	A
for Gasoline Model	B

2.CHECK CAN COMMUNICATION SYSTEM

5.CHECK CAN COMMUNICATION SYSTEM

2.CHECK CAN COMMUNICATION SYSTEM

Check if CAN communication DTCs are output.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>DIAGNOSIS SYSTEM202111,202203,_57,_111829,_0501336,RM100000001Z5K4,202203,202303,_57,_111829,_0501336,RM10000000220XG,202303,202406,_57,_111829,_0501336,RM100000002A0UV,202406,202409,_57,_111829,_0501336,RM100000002M2MU,202409,999999,_57,_111829,_0501336,RM100000002NYQH,

Result:

Result	Proceed to
DTCs are not output	A
DTCs are output	B

3.CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)

GO TO CAN COMMUNICATION SYSTEM

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING202111,202203,_57,_111829,_0501336,RM100000001Z5K1,202203,202303,_57,_111829,_0501336,RM10000000220XE,202303,999999,_57,_111829,_0501336,RM100000002AL7W,

3.CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)

Check if electronically controlled brake system DTCs are output.

Chassis > Brake/EPB > Trouble Codes: 50001 435

Chassis > Brake Booster > Trouble Codes: 50001 466

Result:

Result	Proceed to
DTCs are not output	A
DTCs are output	B

4.PERFORM ACTIVE TEST USING GTS

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)>DIAGNOSTIC TROUBLE CODE CHART202111,999999,_54,_111814,_0500671,RM100000001Z2ZD,

4.PERFORM ACTIVE TEST USING GTS

Perform the Active Test according to the display on the GTS.

Body Electrical > Combination Meter > Active Test

Tester Display	Measurement Item	Control Range	Diagnostic Note
Speed Signal Input (0)	Vehicle speed test signal input	ON	When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
Speed Signal Input (40)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · The value displayed on the speedometer may deviate.*
Speed Signal Input (80)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · The value displayed on the speedometer may deviate.*
Speed Signal Input (120)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · The value displayed on the speedometer may deviate.*
Speed Signal Input (160)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · The value displayed on the speedometer may deviate.*
Speed Signal Input (200)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · The value displayed on the speedometer may deviate.*
Speed Signal Input (240)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.

*: For the tolerance of each Active Test, refer to On-vehicle Inspection.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM (for TFT Meter Type)>ON-VEHICLE INSPECTION202111,999999,_58,_111835,_0504958,RM100000001ZKM7,

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (0)

50004 409 300

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (40)

50004 409 301

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (80)

50004 409 302

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (120)

50004 409 303

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (160)

50004 409 304

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (200)

50004 409 305

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (240)

50004 409 306

Result:

Result	Proceed to
Active Test can be performed correctly	A
Active Test cannot be performed correctly	B

REPLACE NO. 2 SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>BRAKE ACTUATOR (for HV Model)>REMOVAL202111,202203,_54,_111814,_0500722,RM100000001Z37A,202203,202303,_54,_111814,_0500722,RM1000000022E3V,202303,202406,_54,_111814,_0500722,RM100000002B2OC,202406,999999,_54,_111814,_0500722,RM100000002MRSA,

REPLACE COMBINATION METER ASSEMBLY

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL202111,202203,_58,_111835,_0501288,RM100000001Z5FJ,202203,202303,_58,_111835,_0501288,RM1000000022EX1,202303,202406,_58,_111835,_0501288,RM100000002AL91,202406,999999,_58,_111835,_0501288,RM100000002MQF3,

5.CHECK CAN COMMUNICATION SYSTEM

Check if CAN communication DTCs are output.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>DIAGNOSIS SYSTEM202111,202203,_57,_111829,_0499998,RM100000001Z135,202203,202303,_57,_111829,_0499998,RM100000002208G,202303,202406,_57,_111829,_0499998,RM10000000291NB,202406,202409,_57,_111829,_0499998,RM100000002L89Q,202409,999999,_57,_111829,_0499998,RM100000002O6WO,

Result:

Result	Proceed to
DTCs are not output	A
DTCs are output	B

6.CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)

GO TO CAN COMMUNICATION SYSTEM

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>HOW TO PROCEED WITH TROUBLESHOOTING202111,202203,_57,_111829,_0499998,RM100000001Z134,202203,202303,_57,_111829,_0499998,RM100000002205J,202303,999999,_57,_111829,_0499998,RM10000000291N8,

6.CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)

Check if electronically controlled brake system DTCs are output.

Chassis > Brake/EPB > Trouble Codes: 50001 435

Result:

Result	Proceed to
DTCs are not output	A
DTCs are output	B

7.PERFORM ACTIVE TEST USING GTS

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>DIAGNOSTIC TROUBLE CODE CHART202111,202203,_54,_111814,_0503031,RM100000001ZCX3,202203,202303,_54,_111814,_0503031,RM1000000022G9Y,202303,999999,_54,_111814,_0503031,RM100000002A4KO,

7.PERFORM ACTIVE TEST USING GTS

Perform the Active Test according to the display on the GTS.

Body Electrical > Combination Meter > Active Test

Tester Display	Measurement Item	Control Range	Diagnostic Note
Speed Signal Input (0)	Vehicle speed test signal input	ON	When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
Speed Signal Input (40)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · The value displayed on the speedometer may deviate.*
Speed Signal Input (80)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · The value displayed on the speedometer may deviate.*
Speed Signal Input (120)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · The value displayed on the speedometer may deviate.*
Speed Signal Input (160)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · The value displayed on the speedometer may deviate.*
Speed Signal Input (200)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · The value displayed on the speedometer may deviate.*
Speed Signal Input (240)	Vehicle speed test signal input	ON	· When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test. · When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.

*: For the tolerance of each Active Test, refer to On-vehicle Inspection.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM (for TFT Meter Type)>ON-VEHICLE INSPECTION202111,999999,_58,_111835,_0504958,RM100000001ZKM7,

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (0)

50004 409 300

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (40)

50004 409 301

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (80)

50004 409 302

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (120)

50004 409 303

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (160)

50004 409 304

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (200)

50004 409 305

Body Electrical > Combination Meter > Active Test

Tester Display
Speed Signal Input (240)

50004 409 306

Result:

Result	Proceed to
Active Test can be performed correctly	A
Active Test cannot be performed correctly	B

REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>BRAKE ACTUATOR (for Gasoline Model)>REMOVAL202111,202203,_54,_111814,_0500728,RM100000001Z37U,202203,202303,_54,_111814,_0500728,RM1000000022E3W,202303,202406,_54,_111814,_0500728,RM100000002B2O5,202406,999999,_54,_111814,_0500728,RM100000002MRSD,

REPLACE COMBINATION METER ASSEMBLY