RM36D0EC _56 Audio / Visual / Telematics _083082 PARK ASSIST / MONITORING _0417653 BLIND SPOT MONITOR SENSOR A

PARK ASSIST / MONITORING BLIND SPOT MONITOR SENSOR INSTALLATION

CAUTION / NOTICE / HINT

NOTICE:: ·

Avoid any impact to the blind spot monitor sensor.

·

Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.

HINT:: ·

The blind spot monitor beam axis inspection is performed to confirm whether the sensor is transmitting radio waves.

·

The blind spot monitor beam axis confirmation is performed to confirm whether the sensor's beam axis is correct, and perform adjustment of the beam axis by using a reflector.

·

The blind spot monitor sensor installation condition inspection is performed to confirm whether the sensor is placed vertically to the ground (+/-2.2°) by using a jig, and that the sensor is 46 to 54° from the line parallel to the vehicle center line.

Hide Display 88172 1.INSTALL BLIND SPOT MONITOR SENSOR LH

0,0 0,0 false

	Connector
	Nut

Connect the connector.

Install the 3 nuts and blind spot monitor sensor LH.

NOTICE:: Do not drop the blind spot monitor sensor LH. If it is dropped, replace it with a new one.

Hide Display 88162 2.INSTALL BLIND SPOT MONITOR SENSOR RH

Hide Display 3.PERFORM BLIND SPOT MONITOR SENSOR INSTALLATION CONDITION INSPECTION

Hide Display 4.INSTALL REAR BUMPER ASSEMBLY

for Type A:

for Type B:

Hide Display 5.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Hands Free Power Back Door)

for M20C-FKS:

for M20D-FKS:

for A25B-FXS:

for A25D-FXS:

for A25F-FXS:

Hide Display 6. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (w/ Hands Free Power Back Door)

HINT:: When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.; Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART202409,999999,_V1,_083041,_0402304,RM100000002NY03,

Hide Display 7. BSM ECU DATA WRITE

NOTICE:: BSM ECU data write can only be performed when the beam axis adjustment value is able to be saved to the GTS.; Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>BLIND SPOT MONITOR SENSOR>ADJUSTMENT202409,999999,_56,_083082,_0417653,RM100000002NTDZ_01_0007,

Hide Display 8.PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION

NOTICE:: When BSM ECU data write can be performed, it is possible to omit the blind spot monitor beam axis confirmation.; Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>BLIND SPOT MONITOR SENSOR>ADJUSTMENT202409,999999,_56,_083082,_0417653,RM100000002NTDZ_01_0003,

Hide Display 9. PERFORM DIAGNOSTIC SYSTEM CHECK

Hide Display 891B2 10. CHECK KICK DOOR CONTROL SENSOR (w/ Hands Free Power Back Door)