RM36D0EC _58 Vehicle Interior _083103 SEAT BELT _0694954 SEAT BELT WARNING SYSTEM(for GTMC Made) Y

SEAT BELT  SEAT BELT WARNING SYSTEM(for GTMC Made)  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Use the following procedure to troubleshoot the seat belt warning system.

·

*: Use the GTS.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS

NEXT

3.PRE-CHECK
3.PRE-CHECK
a.

Measure the auxiliary battery voltage with the ignition switch off.

Standard voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.


b.

Check the fuses and relays.


c.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.


Result:
Proceed to
NEXT



NEXT

4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
5.CHECK CXPI COMMUNICATION SYSTEM*

Result:
Result Proceed to
CXPI DTCs are not output A
CXPI DTCs are output B



A

6.CHECK COMBINATION METER ASSEMBLY

B

6.CHECK COMBINATION METER ASSEMBLY
a.

Check the operation of the speedometer and shift indicator on the combination meter assembly.

OK:

The speedometer and shift indicator on the combination meter assembly operate normally.



Result:
Proceed to
OK
NG



OK

7.PROBLEM SYMPTOMS TABLE

NG

7.PROBLEM SYMPTOMS TABLE

Result:
Result Proceed to
Fault is not listed in problem symptoms table A
Fault is listed in problem symptoms table B



A

8.OVERALL ANALYSIS AND TROUBLESHOOTING*

B

9.REPAIR OR REPLACE
9.REPAIR OR REPLACE
Result:
Proceed to
NEXT



NEXT

10.CONFIRMATION TEST
10.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END