RM3660EC _55 Steering _080761 POWER ASSIST SYSTEMS _0392052 POWER STEERING SYSTEM(for Gasoline Model) G

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM(for Gasoline Model)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1. CHECK STEERING EFFORT (TORQUE)

NOTICE:

These service operations may affect the SRS airbags. Be sure to read the precautionary notices concerning the SRS airbag system before servicing.

for NR Series Engine: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for NR Series Engine)>PRECAUTION

except NR Series Engine: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (except NR Series Engine)>PRECAUTION


a.

Stop the vehicle on a level, paved surface and align the wheels straight ahead.




d.

Using a torque wrench, check that the steering wheel set bolt is properly tightened.

Torque:
62 N*m (632 kgf*cm, 46 ft.*lbf)


e.

Start the engine so that the power steering is ready to operate.


f.

Turn the steering wheel 90 degrees to the right and check steering effort (torque) with the steering wheel turned. Check in the opposite direction using the same method.

Standard Steering Effort (Reference):

5.5 N*m (56 kgf*cm, 49 in.*lbf) or less



g.

Align the front wheels facing straight ahead.


h.

Turn the ignition switch off.