BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS BRAKE CONTROL POWER SUPPLY INSTALLATION
PROCEDURE
89686A
1.INSTALL NO.1 BRAKE CONTROL POWER SUPPLY BRACKET
Install the No. 1 brake control power supply bracket with 4 bolts.
- Torque:
- 4.5 N*m (46 kgf*cm, 40 in.*lbf)
- NOTICE:
- ·
Do not drop the brake control power supply assembly. If it is dropped, replace it with a new one.
·Do not hold the brake control power supply assembly by the connector.
·Make sure to install the No. 1 brake control power supply bracket with its arrow facing the connector.
89680
2.INSTALL BRAKE CONTROL POWER SUPPLY ASSEMBLY
- NOTICE:
- ·
Do not hold the brake control power supply assembly by the connector.
·Do not drop the brake control power supply assembly when carrying it.
| *a | Rock Lever |
Connect the brake control power supply assembly connector.
Connect the brake control power supply assembly connector and push down the lock lever to engage the claw as shown in the illustration.
- NOTICE:
- ·
When connecting the brake control power supply assembly connector, make sure that the connecting parts of the brake control power supply assembly connector are free of dirt, water or other foreign matter.
·Be sure to securely connect the brake control power supply assembly connector.
Engage the hook and install the brake control power supply assembly with the 2 bolts.
- Torque:
- 10 N*m (102 kgf*cm, 7 ft.*lbf)
Install the floor carpet.
3.INSTALL FRONT SEAT ASSEMBLY RH
4.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
for 8ZR-FXE: Click hereGeneral>MAINTENANCE>8ZR-FXE AUXILIARY BATTERY>INSTALLATION202304,999999,_V1,_080956,_0392376,RM100000002ACL8,
for M20F-FXS, M20G-FXS: Click hereGeneral>MAINTENANCE>M20F-FXS, M20G-FXS AUXILIARY BATTERY>INSTALLATION202307,999999,_V1,_080956,_0611807,RM100000002CK9L,
5. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
- HINT:
-
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.