SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SYSTEM(for NR Series Engine)  Key-off Operation Function Operates even if Operating Conditions are not Satisfied  

The sliding roof ECU (sliding roof drive gear sub-assembly) operates its built-in motor according to the sliding roof switch (map light assembly) operation. Using the sliding roof switch (map light assembly), if the sliding roof can be operated normally when 45 seconds or more have elapsed since the engine switch was turned off, the key-off operation function may be abnormal.

NOTICE:

·

If the sliding roof ECU (sliding roof drive gear sub-assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear sub-assembly) must be initialized.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM (for NR Series Engine)>INITIALIZATION202304,999999,_59,_080734,_0600093,RM100000002BB5I,

·

The sliding roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM (for NR Series Engine)>HOW TO PROCEED WITH TROUBLESHOOTING202304,999999,_59,_080734,_0600093,RM100000002BB5F,

·

Before replacing the main body ECU (multiplex network body ECU) refer to Service Bulletin.