RM3660EC _53 Suspension _080780 TIRE PRESSURE MONITORING _0592791 TIRE PRESSURE WARNING SYSTEM(for Gasoline Model (for Type B)) C

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING SYSTEM(for Gasoline Model (for Type B))  C214196  Tire Pressure Monitor Transmitter ID 1 Component Internal Failure  C214296  Tire Pressure Monitor Transmitter ID 2 Component Internal Failure  C214396  Tire Pressure Monitor Transmitter ID 3 Component Internal Failure  C214496  Tire Pressure Monitor Transmitter ID 4 Component Internal Failure  


DESCRIPTION

The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressure of each wheel. The measured values are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves. The ECU compares the measured tire pressure values with the tire pressure threshold. When the measured tire pressure value is less than this threshold, the warning light in the combination meter assembly illuminates.

When the internal circuit of a tire pressure warning valve and transmitter is malfunctioning, one of these DTCs is output.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
C214196 Tire Pressure Monitor Transmitter ID 1 Component Internal Failure Tire pressure warning valve and transmitter is malfunctioning Tire pressure warning valve and transmitter -
C214296 Tire Pressure Monitor Transmitter ID 2 Component Internal Failure Tire pressure warning valve and transmitter is malfunctioning Tire pressure warning valve and transmitter -
C214396 Tire Pressure Monitor Transmitter ID 3 Component Internal Failure Tire pressure warning valve and transmitter is malfunctioning Tire pressure warning valve and transmitter -
C214496 Tire Pressure Monitor Transmitter ID 4 Component Internal Failure Tire pressure warning valve and transmitter is malfunctioning Tire pressure warning valve and transmitter -

HINT:

It is necessary to perform the following procedure to identify the tire pressure warning valve and transmitter that is malfunctioning because it cannot be identified by the output DTC.


CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the tire pressure warning valve and transmitter, read the transmitter IDs and number of the transmitters (4 or 5) stored in the old ECU using the GTS and write them down before removal.



PROCEDURE

1.IDENTIFY TRANSMITTER CORRESPONDING TO DTC (TIRE POSITION)
a.

Display the "ID Tire Position" value for each wheel using the GTS.


b.

Refer to the following chart and check the wheel position of the DTC and transmitter match.

Chassis > Tire Pressure Monitor > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
ID 1 Tire Position ID1 Tire Position No Information or FL or FR or RL or RR or Spare or Judging ID1 tire position is displayed If no tire position information is stored, "No Information" will be displayed.
ID 2 Tire Position ID2 Tire Position No Information or FL or FR or RL or RR or Spare or Judging ID2 tire position is displayed If no tire position information is stored, "No Information" will be displayed.
ID 3 Tire Position ID3 Tire Position No Information or FL or FR or RL or RR or Spare or Judging ID3 tire position is displayed If no tire position information is stored, "No Information" will be displayed.
ID 4 Tire Position ID4 Tire Position No Information or FL or FR or RL or RR or Spare or Judging ID4 tire position is displayed If no tire position information is stored, "No Information" will be displayed.
Chassis > Tire Pressure Monitor > Data List
Tester Display
ID 1 Tire Position
ID 2 Tire Position
ID 3 Tire Position
ID 4 Tire Position
50003 452 66,67,68,69

Result:
Proceed to
NEXT



NEXT