RM35X0E _58 Vehicle Interior _078886 PRE-COLLISION _0382740 PRE-COLLISION SYSTEM D

PRE-COLLISION  PRE-COLLISION SYSTEM  VEHICLE CONTROL HISTORY  


NOTICE:

When checking the vehicle control history, make sure to record the output histories. Then, remove the histories and recheck the output histories again.


CHECK VEHICLE CONTROL HISTORY (PRE-COLLISION SYSTEM)


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Pre-Collision System / Utility / Vehicle Control History (RoB).

Body Electrical > Pre-Collision System > Utility
Tester Display
Vehicle Control History (RoB)
50005 432 55

e.

According to the display on the GTS, read the Vehicle Control History (RoB).

Vehicle Control History (RoB)
Multi-information Display Code Tester Display Description Diagnostic Note
Pre-Collision System Malfunction Visit Your Dealer X2000 Yaw Rate Sensor Malfunction The forward recognition camera received a yaw rate sensor malfunction signal from the skid control ECU (brake actuator assembly). Perform troubleshooting for the electronically controlled brake system.
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2001 Steering Angle Sensor Malfunction The forward recognition camera received a steering sensor malfunction signal from the steering sensor. Perform troubleshooting for the electronically controlled brake system.
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2002 Accelerator Sensor Malfunction The forward recognition camera received an accelerator pedal position sensor malfunction signal from the ECM.
for 7GR-FKS:

Perform troubleshooting for the SFI system.

(Click here)


for 1GD-FTV:

Perform troubleshooting for the ECD system.

w/ DPF:(Click here)

w/ Exhaust Gas Temperature Sensor for EGR:(Click here)

w/ Urea SCR System:(Click here)


Pre-Collision System Malfunction Visit Your Dealer X2003 Brake Control System Malfunction The forward recognition camera received an electronically controlled brake system malfunction signal from the skid control ECU (brake actuator assembly). Perform troubleshooting for the electronically controlled brake system.
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2011 Front Recognition Camera System Software Not Programmed The forward recognition camera cannot store the vehicle information. Perform troubleshooting for the front camera system.
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2012 Front Recognition Camera Malfunction The forward recognition camera detected an internal malfunction. Perform troubleshooting for the front camera system.
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2013 Front Recognition Camera Optical Axis Misalignment Malfunction The forward recognition camera detected optical axis misalignment. Refer to DTC C1AA800 in Front Camera System
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2014 Front Recognition Camera Optical Axis Not Adjusted Forward recognition camera optical axis adjustment has not been performed. If this Vehicle Control History code is output, perform forward recognition camera optical axis adjustment, clear the Vehicle Control History and then check that this code is not stored again.
HINT:

Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

One Time Recognition: Click here(Click here)

Sequential Recognition: Click here(Click here)


Front Camera Unavailable See Owner's Manual X2015 Front Recognition Camera Dirt System operation was temporarily suspended due to the forward recognition camera not being able to detect objects. Refer to Vehicle Control History code X2015 of Front Camera System.
(Click here)
Front Camera Unavailable X2016 Front Recognition Camera Outside Guaranteed Operating Temperature System operation was temporarily suspended due to the forward recognition camera being excessively hot or cold. Refer to Vehicle Control History code X2016 of Front Camera System.
(Click here)
Front Camera Unavailable X2017 Front Recognition Camera Outside Guaranteed Operating Voltage System operation was temporarily suspended due to the forward recognition camera power source voltage being excessively high or low. Refer to Vehicle Control History code X2017 of Front Camera System.
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2018 Front Recognition Camera Heater Malfunction The forward recognition camera detected a forward recognition camera heater malfunction. Perform troubleshooting for the front camera system.
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X201D Front Recognition Camera System Software Malfunction The forward recognition camera detected a specification information malfunction. Perform troubleshooting for the front camera system.
(Click here)
Front Camera Unavailable X201F Front Recognition Camera Temporary Unavailable (Front Recognition Camera Recognition Stop) The forward recognition camera operation was suspended. Perform troubleshooting for the front camera system.
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2020 Front Radar Sensor Destination Malfunction The forward recognition camera received a destination information malfunction signal from the millimeter wave radar sensor assembly. Perform troubleshooting for the front radar sensor system.
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2021 Front Radar Sensor Malfunction The forward recognition camera received a malfunction signal from the millimeter wave radar sensor assembly. Perform troubleshooting for the front radar sensor system.
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2022 Front Radar Sensor Optical Axis Misalignment Malfunction The forward recognition camera received a beam axis misalignment malfunction signal from the millimeter wave radar sensor assembly. Refer to DTC C1A1100 in front radar sensor system
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2023 Front Radar Sensor Optical Axis Not Adjusted The forward recognition camera received a beam axis unadjusted signal from the millimeter wave radar sensor assembly. If this code is output, perform millimeter wave radar sensor assembly beam axis adjustment, clear the Vehicle Control History and then check that this code is not output again.
(Click here)
Pre-Collision System Unavailable X2024 Front Radar Sensor Temporary Unavailable (Vertical Direction Optical Axis Misalignment) The forward recognition camera received a beam axis vertical misalignment signal from the millimeter wave radar sensor assembly. Perform millimeter wave radar sensor assembly beam axis adjustment.
(Click here)
Pre-Collision System Unavailable X2025 Front Radar Sensor Temporary Unavailable (Horizontal Direction Optical Axis Misalignment) The forward recognition camera received a beam axis horizontal misalignment signal from the millimeter wave radar sensor assembly. Perform millimeter wave radar sensor assembly beam axis adjustment.
(Click here)
Pre-Collision System Unavailable Clean Sensor X2026 Front Radar Sensor Dirt The forward recognition camera received a millimeter wave radar sensor assembly dirty signal from the millimeter wave radar sensor assembly. Refer to Vehicle Control History code X2026 of front radar sensor system.
(Click here)
Pre-Collision System Unavailable X2027 Front Radar Sensor Outside Guaranteed Operating Temperature The forward recognition camera received a temperature malfunction signal from the millimeter wave radar sensor assembly. Refer to Vehicle Control History code X2027 of front radar sensor system.
(Click here)
Pre-Collision System Unavailable X2028 Front Radar Sensor Outside Guaranteed Operating Voltage The forward recognition camera received a voltage malfunction signal from the millimeter wave radar sensor assembly. Refer to Vehicle Control History code X2028 of front radar sensor system.
(Click here)
Pre-Collision System Malfunction Visit Your Dealer X2070 Communication Error from Pre-Collision System to Front Radar Sensor Communication malfunction occurred between the forward recognition camera and millimeter wave radar sensor assembly. Perform troubleshooting for the front radar sensor system.
(Click here)



CLEAR VEHICLE CONTROL HISTORY (PRE-COLLISION SYSTEM)


NOTICE:

By performing this procedure, all stored Vehicle Control History will be cleared.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Pre-Collision System / Utility / Vehicle Control History (RoB) (Clear).

Body Electrical > Pre-Collision System > Utility
Tester Display
Vehicle Control History (RoB)
50005 432 55

e.

According to the display on the GTS, clear the Vehicle Control History (RoB).