Use these procedures to troubleshoot the power steering system.
*: Use the GTS.
| Proceed to |
|---|
| NEXT |
NEXT
Interview the customer and confirm the problem.
| Proceed to |
|---|
| NEXT |
NEXT
Check and record DTCs and Freeze Frame Data.
for DTC Check / Clear: Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM (w/ Variable Flow Control Solenoid Valve)>DTC CHECK / CLEAR201902,999999,_55,_078944,_0382923,RM100000001G7TS,
for Freeze Frame Data: Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM (w/ Variable Flow Control Solenoid Valve)>FREEZE FRAME DATA201902,999999,_55,_078944,_0382923,RM100000001G7TT,
Clear the DTCs and Freeze Frame Data.
for DTC Check / Clear: Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM (w/ Variable Flow Control Solenoid Valve)>DTC CHECK / CLEAR201902,999999,_55,_078944,_0382923,RM100000001G7TS,
Reconfirm the DTCs.
Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data.
for DTC Check / Clear: Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM (w/ Variable Flow Control Solenoid Valve)>DTC CHECK / CLEAR201902,999999,_55,_078944,_0382923,RM100000001G7TS,
for Freeze Frame Data: Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM (w/ Variable Flow Control Solenoid Valve)>FREEZE FRAME DATA201902,999999,_55,_078944,_0382923,RM100000001G7TT,
When CAN communication system DTCs are output, repair the CAN communication system first.
If the GTS cannot communicate with the power steering ECU assembly, inspect the CAN communication system.
| Result | Proceed to |
|---|---|
| DTCs are not output. (Problem symptom occurs.) | A |
| DTCs are output. | B |
| DTCs are not output. (Problem symptom does not occur.) | C |
A
B
C
Check if the problem symptoms are listed in the problem symptoms table.
| Result | Proceed to |
|---|---|
| The problem symptoms are not listed in the problem symptoms table. | A |
| The problem symptoms are listed in the problem symptoms table. | B |
A
B
| Proceed to |
|---|
| NEXT |
NEXT
Refer to the precautions before performing adjustment, repair or replacement.
| Proceed to |
|---|
| NEXT |
NEXT
Clear the DTCs.
Turn the ignition switch off.
Turn the ignition switch to ON.
Check if the same DTCs are output.
| Result | Proceed to |
|---|---|
| DTCs are not output. | A |
| DTCs are output. | B |
A
B
| Proceed to |
|---|
| NEXT |
NEXT
Confirm the problem symptoms table and perform troubleshooting.
| Proceed to |
|---|
| NEXT |
NEXT
Confirm the diagnostic trouble code chart and perform troubleshooting.
| Proceed to |
|---|
| NEXT |
NEXT