CHECK DTCs
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / PPS / Trouble Codes.
Check for DTCs (Test Failed / Pending / Confirmed).
| GTS Display | Description |
|---|---|
| Test Failed | Shows the malfunction judgment results during the current trip. |
| Pending | Shows the malfunction judgment results up to now. (Indicates the possibility of a malfunction when no DTC is confirmed.) |
| Confirmed | Shows the DTCs confirmed up to now. (The number of current trips differs for each DTC.) |
Freeze frame data is stored respectively for pending DTCs, confirmed DTCs and the latest DTCs.
CHECK TIME STAMP
By checking Time Stamp, the time and order in which DTCs were stored in an ECU can be checked.
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Health Check.
Perform the following steps when the data setting screen is displayed.
Select the systems for which to perform Health Check and check for time stamp data.
Powertrain
Chassis
Body
Store All Data
Select "Yes" when "Would you like to include Time Stamp Data?" is displayed.
If "Yes" is not selected, time stamp data will not be stored.
After Health Check has completed, select "Time Stamp Data" to display the Time Stamp screen.
Select the desired system from the drop-down list on the bottom of the Time Stamp screen.
Check the order and time which DTCs were stored for the selected system.
CLEAR DTCs
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / PPS / Trouble Codes.
Clear the DTCs.
Turn the ignition switch off.
Disconnect the GTS from the DLC3.