RM35X0E _53 Suspension _078885 TIRE PRESSURE MONITORING _0382739 TIRE PRESSURE WARNING SYSTEM J

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING SYSTEM  Cannot Switch to Automatic ID Registration Mode  


DESCRIPTION

When "Change Wheel" is selected on the multi-information display and the "OK" switch (steering pad switch assembly) is pushed and held, the system enters ID registration mode and the tire pressure warning light blinks 3 times.

The main body ECU (multiplex network body ECU) receives signals from the combination meter assembly via the CAN communication line.

PROCEDURE

1.CHECK TEST MODE (TIRE PRESSURE WARNING RESET SWITCH CHECK [DTC C2198])
a.

Perform Test Mode Procedure (Tire Pressure Warning Reset Switch Check (DTC C2198)).

Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>TEST MODE PROCEDURE

Result:
Proceed to
NEXT




NEXT

GO TO DTC C2198

Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>C2198